VTR1000.ORG

Maybe. The compatibility shows all years. That would suggest the the internals are the same even though the petcock is different. I'm guessing that your bike has the 19L tank, which was never used on the US imported bikes. I really don't know enough about the bigger tank to be of any help. I will ad...

What are you calling "the pump"? None of the models had a pump. Is it the petcock you are referring to?
Number 7 in the diagram?
https://www.cmsnl.com/honda-vtr1000f-fi ... 3ENwOTMK00

Possibly not a source because of the US location, but it is a good resource for figuring out what the connectors are. I have purchased from them and they are a solid seller. Also go with a quality wire, more strands of copper and cross linked insulation. The wire is going to be costly, depending how...

Anyone know where I can find a jar of unicorn tears?

Another possibility, though less likely, is the o-ring that seals the fuel level sending unit. It's another rubber bit.

While the problem sounds electrical. Repeat your load test with the enrichment (choke) pulled out. Don't know if a failing petcock would restrict the flow of fuel and cause what your experiencing.

Also using Brembo clutch master from a 09'-11' Ducati Monster. Pull is a bit lighter, but also using an Oberon slave. https://i.postimg.cc/V5S9RnPF/Screenshot-2021-02-01-Stampa-di-fax-a-pagina-intera-oppracing-10-8101-20-brembo-pdf.png https://i.postimg.cc/vcfrRyBg/Screenshot-2021-02-01-Stampa-di-fa...

That made my day.

Thanks to all for the cheer.

I guess late cretaceous.

Did the conversion to the euro pass to flash switch a few years ago. This is the part number, 35020-mbb-640. Don't know if they are still available. Don't remember exactly how I did it, but if I can, it wasn't that hard. Used this pin out to sort the wires (thanks Eric). You'll need a pick to remove...

I'm on the lookout for a Blackbird Clutch m/c but need one with a lever. They dont look the same as a Storm one to me...correct me if I'm wrong ... Blackbird clutch lever is the same part no as the late Storm one... They are both different to the early Storm part number... However the VFR800 is the...

Yep duffers is right blackbirds match 👍. You’ve dropped them forks a fair wack mac ! I'm on the lookout for a Blackbird Clutch m/c but need one with a lever. They dont look the same as a Storm one to me...correct me if I'm wrong ... Blackbird clutch lever is the same part no as the late Storm one.....

From an '09-'11 Monster 1100. The stock axial masters limited the positioning of the bars. They look better, but the real reason was to improve the ergonomics a bit. Closer, but still not exactly where I want to be. What I need is for Tommaselli to offer the riser part of the clip-on with a bit mor...

From an '09-'11 Monster 1100. The stock axial masters limited the positioning of the bars. They look better, but the real reason was to improve the ergonomics a bit. Closer, but still not exactly where I want to be. What I need is for Tommaselli to offer the riser part of the clip-on with a bit more...