Search found 10 matches
- Mon Jan 15, 2018 12:38 pm
- Forum: Bike Chat
- Topic: single exhaust mod
- Replies: 7
- Views: 1988
Re: single exhaust mod
Im going to machine one out of ally so it looks a bit like the original when I have some time to model and program the cnc.
- Mon Jan 15, 2018 9:29 am
- Forum: Bike Chat
- Topic: single exhaust mod
- Replies: 7
- Views: 1988
single exhaust mod
Hi all Just thought i would show you my attempts of fitting a single exhaust to the right side. Got the Exhaust off fleebey for $30 au. some 50mm dia stainless tube a grinder and a tig welder and hay presto. goes good around the doors sounds great will have to see what its like on the track in a cou...
- Fri Oct 06, 2017 8:58 am
- Forum: Bike Chat
- Topic: fork upgrade 1mm hole
- Replies: 2
- Views: 864
Re: fork upgrade 1mm hole
The damper, bush slider and the bottom part of the forks have different part numbers
- Thu Oct 05, 2017 6:50 am
- Forum: Bike Chat
- Topic: fork upgrade 1mm hole
- Replies: 2
- Views: 864
fork upgrade 1mm hole
If you have forks from a newer model should you still drill the 1 mm holes in the fork legs if doing the roger upgrade. Was reading on some other sites that the newer models have different damper so don't need to drill the hole.
Rob
Rob
dyno run
Thought I take my bike for a dyno today just to see how it is before I piss about with it and probably rock it up. Its a 2002 and has standard carb settings, Staintune exhaust, CBR 600 stick coils the pair system removed a lightened flywheel and 98,000 kms on the clock max power was 91.8hp at 8800 r...
- Mon Dec 12, 2016 8:45 am
- Forum: Bike Chat
- Topic: Manual CCT
- Replies: 1
- Views: 544
Manual CCT
Does the MCCT have to be so long. I was going to pull mine to bits and convert them myself and was wondering why you have a long screw sticking out. I assume that you would not need to adjust them that much. thought I would try and make mine as small as possible.
Robert Charlton
Robert Charlton
- Sat Oct 15, 2016 8:16 am
- Forum: Bike Chat
- Topic: photoshop fairing crop
- Replies: 12
- Views: 1496
Re: photoshop fairing crop
Hi rod could you do one with the fairing cut along the bottom of the frame just to see what it would look like thanks Hi not to sure what you meant. Did you mean something like this. You would have to have another way of securing the lower part as the bit that bolts to the frame is now gone. I like...
- Thu Oct 13, 2016 1:51 pm
- Forum: Bike Chat
- Topic: photoshop fairing crop
- Replies: 12
- Views: 1496
photoshop fairing crop
Hi all when I got my VTR a few months ago it was got for track days and to tinker with but still keeping it road legal. one of my plans was to trim the fairing down somewhat to show off the engine the problem with that is the side rads. my plan is to move them under the seat or one at the front and ...
- Fri Sep 30, 2016 3:05 pm
- Forum: The Welcome Inn
- Topic: Hi all new stormer
- Replies: 10
- Views: 2034
- Thu Sep 29, 2016 1:10 pm
- Forum: The Welcome Inn
- Topic: Hi all new stormer
- Replies: 10
- Views: 2034
Hi all new stormer
Hi all Got myself a VTR the other month and loving it. It’s not my daily ride have got a Suzuki DL1000 for that so I’m used to twins, this is more of a toy to tinker with and do a few track days or a blast through the hills without the wife on the back. The bike had been lying up for a few years and...