VTR1000.ORG

Hi,
I just finished this project where I build a temperature sensor for the front and rear tire and I wanted to share that with you. Herehttps://programacionsinfaltas.wordpress.com you have the link. I can help you on the way if you have problems. I am sure you will find this gadget very useful.

tony.mon wrote: ↑Thu Oct 05, 2017 8:20 pm Isn't that called "sag"?

I am on my way to adjust the sag. The binding/drag is caused by some friction in the fork legs and has to be calculated when setting the sag, but to me, 20mm seemed to much.

Yesterday I did the "job". Keep in mind that this is happening after a rebuild with lower bushes and oil and dust seals changed, but with more than 200 miles on the road (thinking they would settle by now). To start with, I wanted to see how much binding/drag I had (rebound off, pre load t...

1)loose the stem nut, wheel axle and calipers 2)jack the front bike (front wheel free) 3) take off wheel/calipers 4) loose lower clamp. At this point ( if all parts are ok) alignment should already be ok.Just to be sure (and check) loose the upper clamp: both the forks have to drop down freely. If ...

I just Rogered my fork and everything went well there but I encounter a problem with the fork binding after installation. At this point I know I didn't mount it the right way...because of the binding. But what is the right way on this bike? I found something that could be useful but it doesn't refer...

alanfjones1411 wrote: ↑Tue Sep 26, 2017 1:37 pm Clutch cable ? or do you mean braided clutch line.

I meant Braided clutch line.

Hi, this is my second VTR ('99) https://drive.google.com/open?id=0B8GqNGIRHjfKcnJOTFdoVFJGWEE , the first one was a '97. In between I had a 929Fireblade and I came to the conclusion that the VTR is more fun for me. I am on the forum for some time now, reading those post related to the mechanics over...