VTR1000.ORG

Deep Purple - Perfect Strangers (Official Video)

P̼i̼n̼k̼ ̼F̼l̼o̼y̼d̼-̼D̼a̼r̼k̼ ̼S̼i̼d̼e̼ ̼O̼f̼ ̼T̼h̼e̼ ̼M̼o̼o̼n̼(̼F̼u̼l̼l̼ ̼A̼l̼b̼u̼m̼)̼

https://www.youtube.com/watch?v=N-tgFDS ... DS7_SI&t=0

Got the wiring soldered up and re-wrapped after removing the spyball alarm and removed the sub frame. Was planning to sand it down and paint it myself, but at a closer look it could need a proper blasting and maybe powder coating :Disbelief: :D https://i.imgur.com/FacLoep.jpg Well done :thumbup:

I have just bought mine to. 62000km on the odo, -99. There is a bit of corrosion on the terminal on the starter, but i think i leave it that way, but i did fill waterproof grease on it. Then i checked the valvecleareance witch was a bit on the tight side, but within, so i left em. Im gonna, instal E...

Il got it, and tryed it, it does fit.

1. checked valves, some tight but within

2. changed brakefluid f/r

3. put the ctek on the battery

Waiting for 18mm plug tool and M-CCT's

I just bought the VTR1000F -99 62000km and it has fresh Metzeler Z6 on, (0620). From my other bikes, (k1300S HP and MT10SP), i do know that Road 5 and GT2 are good stuff. https://dcadprod.azureedge.net/b2c-experience-production/attachments/cjfv6afzh0zms0hqm6xvu290m-moto-tyres-road-5-persp.full.png h...

Thanks to everyone :D Just now iv been measuring valveclearance. Some where on the tight side (total 62000km), but i leave em for some 1000km. Iv also gona swap the A-CCT's for these ones: https://www.camchaintensioner.co.uk/ https://www.camchaintensioner.co.uk/wp-content/uploads/2018/12/VTR.jpg I a...

Håkan in Sweden wrote: ↑Wed Oct 27, 2021 8:40 am Hello
My name is Håkan and I recently bought a Honda Vtr 1000 -03
Will probably ask many questions about Vtr in the future.

Håkan in Sweden

Thanks! Actualy iv found this, i have ordered it:


From https://www.xlmoto.no/

cheekykev wrote: ↑Wed Oct 27, 2021 8:55 pm The original honda plug socket is about £20 from a honda dealer, I know coz I bought one the other day.

Witch one? mm? 12mm plug spanner is what you want. 12mm being the plug thread size but the hex socket part is 18mm. Hope that makes sense. Thin wall socket will do the job or look on ebay... You do knw there is a search option on the forum. Try it you may find out the answers to your questions quic...

Witch one? mm?

alanfjones1411 wrote: ↑Wed Oct 27, 2021 6:47 pm

___Norwegian___ wrote: ↑Wed Oct 27, 2021 4:15 pm




IL think il go for this ones:
https://www.ebay.com/itm/163531191293?s ... 1438.l2649

looking at that listing it seems to be for one tensioner only.You will need two.

Jepp!

Just bough mu 1999 with Danemoto slip ons.
Will it go lean/pink without rejetting?