VTR1000.ORG

I've been a bit absent, the last few months have been hard with time. I'll try to summarize everything :D :thumbup: - I had to buy a new battery and rectifier, I decided on the YHC033 SH754AA regulator from the HONDA LEAD 110, it fits p&p and has a much larger radiator. (Now charging is about 14...

Thank you for your post :D Radiator comes from Yamaha FZ6, it is larger than one of the VTRs approx. 40% and thin as well so it fits under frame, the suspension does not catch. Regarding one muffler, Im going to add 10-20 cm pipe in order to extend exhaust system. We will see, The last way would be ...

Very nice ! ; )

So far I have done a few rides, unfortunately the weather is very poor in Poland at the moment. I added some blue elements such as bolt covers and a radiator cap. I had to raise the radiator up and change the angle because radiator hit the wheel. I installed the calipers from the CBR600 F4 (they hav...

The works are coming to the final end. There are still things like painting exhaust black, checking everything how it works, etc. For sure VTR is already pleasing to the eyes and I am very happy with what came out. 8) 8) 8) 8) https://i.postimg.cc/8JLCmZT6/IMG-20230319-110557.jpg https://i.postimg.c...

I had some free time recently, so I decided to doing some stuff. 1. I replaced the front suspension with a used one in very good condition, painted it black as well 2. I put together almost the whole motorcycle, I'm just waiting for the rear end from the RSV4, the painter is going to paint it soon 😅...

Little update. :cool2 During the last week I managed to disassemble practically whole bike. The frame was taken out and given with the sets, spring for powder painting I've check valve clearance all valves were ok. Finally I mounted MCT, I figuret out that front cilinter timing was bad (FI, FE marks...

Small update, I managed to get a KOSO DB-02R counter + indicator kit for $80. 6 hours of work and everything connected 😅🤯😃. https://i.postimg.cc/62WYbRJR/IMG-20230114-140142.jpg https://i.postimg.cc/4m7w0sM8/IMG-20230114-140159.jpg https://i.postimg.cc/ThHCQpkL/IMG-20230114-140428.jpg The previous K...

Small [UpDate] I managed to do a few things, including:. + Mod of MT-03 lamp (lens with LEDs), + assembly of all brake and clutch cables in a steel braid, + changed jets in carbs(main jets and pilot jets), + changed brake and clutch reservoirs + I found a fuel level sensor from a Chinese 125ccm moto...

I am starting a new topic which I would like to share with you my plans and their progress 8) . A week ago, I purchased a VTR1000 converted into a streetfighter. It can be said that it is 100% complete but with defects. issues at the moment: - KOSO DB01 speedometer backlight not work - fuel level is...

Ofc It will be a long time consuming projekt. I will start new topic.

Hello, my dear friends, my name is Filip, I have been the owner of VTR1000 97y 😎 for a week. The bike is quite customize to streetfighter. I have a lot of work to do: - I have to put on a new sub frame and tail from the RSV4 - painting the frame and engine - carb adjustments - small electric issue t...