VTR1000.ORG

AMCQ46 PM'd re gauge

4x brass hose tails ordered from carbtune, who wants to be incharge of the gauge? shall I send a PM and have it sent to me?

OK I've read the carb balancing guide and that too seems pretty straight forward, however we'll need a brass 5mm take off and a 'T' piece for each bike that is to be checked plus a couple of meters of 5mm silicone / rubber vac hose to pipe it up to allow subsequent checks, so who’d like their carb...

cheers I'll give it a read, i've just been looking on the carb tune website but the info is a little general the post in your link should make things clear. I've already printed out the cct removal procedure (looks pretty straight forward) although I'm thinking modding the OE tensioners (new ones we...

OK that sounds like a plan, who's in? It is still worth fitting the vac take off on the front intake when you have the airbox off when doing CCT, so if there is time order 4 from carbtune. once the pipe work is in, doing the balance is easy. I can post my balance gauge up if anybody wants to try it ...

Looks like we have 5 for definite, so if we decide on 8 minimum we need 3 more to confirm, how likely is this ? I’d say given the relatively low level of interest it’s unlikely but it’s got to be worth a try especially now the nights are drawing in and potential weather will only deteriorate a...

Leaving a job when it’s not YOUR choice is never a nice thing and I guess after 17yrs your allowed to feel a bit sorry for yourself, but don’t let it get you down for long these things usually work out for the best in the long run, opportunity often comes from adversity. My advice would be to bo...

OK just spoken to Phil (flatline) and I can comfirm i'm up for this, w/e 17-18 OK for me, re location I have a std sized garage with work bench large vice plus a drive infront to poss erect a gazebo I've plenty of normal tools,I also have a decent compressor and air tools, lots of torx / allen bits,...

that's exactly what happened to a pal of mine on a RGV years ago, I think I was telling Chris about it yesterday, it flicked him up so he appeared to be doing a handstand on the bike, just like the guy in the video clip mind you he didn't save it and the RGV was no more, my mate was more fortunate t...

Its beer time.... Cheers for today lads, sorry I held you up a bit. Hate wet roads, I'm a wuss. to right, :beer:the kids are now tucked up in bed so I can relax in a hot bath with a cold beer, my leg is quite sore now so it will be nice to soothe the aches away, and Martin don't worry about slowing...

sounds like you've been busy, what is it about deciding to do stuff the day before a planned event, i thought it would be a good idea to have a look at the TPS, and managed to extend the adjustment slots the WRONG way, all sorted now with a reading of 438 ohms, so I thought I'd take it eound the blo...

8.15 at Jordons works for me

Ok - so other than VTR Yorks, who hasnt replied yet, we are on for meeting in Otley just before the bridge at 9.00am ok? By the way, if it is pouring with rain in the morning ill probably not be coming, so will txt you all if that is the case...hopefully not though Ill meet Budd at Jordan's and Yor...

Dont know about Cat digger place mate, but it's here: http://maps.google.co.uk/maps?hl=en&ll=53.751578,-1.632274&spn=0.000006,0.011362&z=17&vpsrc=6&layer=c&cbll=53.751682,-1.632104&panoid=36mNm-Elay4P-SIyTeBr_g&cbp=12,2.24,,0,12.66 yep i know where that is although i...

sounds good, re meeting to ride up, are you starting at point 'A' Gelderd Rd? if so I can meet you there at say 8.15 Yes mate, Jordan's Bikes is there at point A on Geldard Road. LOL it's been such a long time since I want down Gledered rd I didn't even realise there was a bike shop there!! I assum...