VTR1000.ORG

hopefully gears will be the end of the noise mac thanks for digging them out looking forward to having a solid stand too

was that the dripping tap approach tony but i finally got it lol does airbox have to come of

klunc penny drops remove tank remove air filter box (not sure about) remove rear rocker cover set to rear timing marks move to front timming marks ihave mannual cct so i think i have to unload pressure on it making not of turns out then remove dismantle alternator etc remove and replace gears rebuil...

iread it and red it more i red the greater confusiom i thought you had to remove carbs to get to rocker box take the rockerbox and set to tdc then take out cct then strip out alternator then remove reduction gears im dsylexic so it becomes hard to red

i cant believe i have to pull it down and rebuild oh well fairings off strip top end aaaaaaaaaaaaaaaahhhhhhhhhhhhhhhh on top of that i fell down our stairs yet again

good transfer reduction gears wanted

tramsfer geras do you still have a set tony

what are the transfer gears noisestops when youstop pressing starter

its back a squeak or sharp noise it only lasts 10-15 sec im begining to think its the starter clutch , water pump orstarter motor i have heard the noise on other bikes it doesnt look like the head gasket whistling as i cant see oil on the out side of the cylinder head and plug shows no water oil gla...

benvenuti nel forum i love yellow bikes i have a yellow vfr800 hope you enjoy your time online

hawk chris you are de man back front one off no noise and msounds better ie slacker now few odds and ends voltmeter bleed brakes reroute clutch hose and hope fully weather be goodandaway wego cant wait to ride the little b.....d

if your pipes are just for looks somthing like vipe etc most of these upgrades producce little in the way of gains on dyno without other mods mine had some pipes from uk black widow down tubes and end cans it had the carbs dynojeted annd something dreilled it managed 110bh at rear wheel on dyno abso...

thanks guys it sounds as if it the front one will back it of two flats and see what happens

i have twice had a squeak come from my engine on start up i have no idea what it is i wonderd if i bhave a tight spot in my cam chain i only have it since i put in mannual tensioners it dosent make any noise once mrun for a few seconds please let it be something simple first thoughts :leak in cylind...

yahoo starts on the button idles and reves nicely sounds like a small dumper truck not as load as a harley but a nice thump thump new plugs new oil and filter new coolant new air filter readyfor the summer five month off my life gone on her only fairing to put on .im even begining to like her (blush...