VTR1000.ORG

hello and welcome

Fh020A is what I used from a triumph and about £40 on eBay .
The plugs are also on eBay for about £6
So it’s easy enough but you will need a good set of uninsulated open barrel crimps .

Hello and welcome . Enjoy your new ride

yeti has the moulds for that set might be worth contacting him to see if he still making them

Happy birthday day

hello and welcome . re bleeding the clutch I've found it easier back bleeding it with a large syringe but removing the air from the syringe first via filling it up and capping it off , holding it vertical and pulling on the plunger to create a vacuum you'll see air bubble inside and tapping it to re...

Good job finding that

Removed the nitron rear shock as it was lacking much compression damping ,boxed it up and sent it to nitron for a full service .
Started to sand down that colour tank . Going to put it in primer as it’ll be a lot easier on my eyes .

AMCQ46 wrote: ↑Mon Feb 06, 2023 8:11 am It would look good in yellow

tony.mon wrote: ↑Sun Feb 05, 2023 9:24 pm

lloydie wrote: ↑Sun Feb 05, 2023 3:07 pm all is well except a body work rattle at 4K !!!

Yours or the bike's?

Both starting to feel my age ! Starting to wish I’d streetfightered it !!

Put it all back together with a rear rack and different tank as the other one had rusted . 50 mile shake down run and all is well except a body work rattle at 4K !!!
Few jobs to do and it’ll be ready for Devon

Well done with tracking him down and even better he’s willing to assist you .

It’s alive , well done

Enjoy the sun but not to much as I want to see this one getting done

One step closer