Search found 7216 matches
- Tue Oct 26, 2004 1:36 pm
- Forum: Bike Chat
- Topic: CCT Failure Front or Rear?
- Replies: 42
- Views: 7690
I've replace two fronts. First one at 18,500 and then again at 26,000 ish. Now I'm coming up to 30,000 and when cold I,m hearing those little tell tell signs from the rear. Most of the time I've always use Silcoleene Semi-sinth. The tensioners might be a pain but I haven't heared of any one not havi...
Tony/tradedog had a look an old tensioner last night cause something jst didn't sit right in my mind. The groove which the end of your modded bolt slots into only rotates. As the chain slackens the rotation is anti-clockwise. So as you turn the bolt to allow the ajustment to happen as it is on a thr...
- Wed Oct 20, 2004 12:13 pm
- Forum: Workshop
- Topic: Which brake discs is bestest ???
- Replies: 17
- Views: 1437
- Wed Oct 20, 2004 12:10 pm
- Forum: Jokes
- Topic: Nice driving, but...
- Replies: 3
- Views: 510
- Wed Oct 20, 2004 9:17 am
- Forum: Workshop
- Topic: Battery conditioners............
- Replies: 7
- Views: 805
E-Bloke I know your looking for something else other than the optimate one but my optimate came with a little lead to attach to the battery with a plug on the other end. I poked the lead through to the underside of the seat subframe, clipped it in place with a cable tie and now I don't have to bothe...
- Tue Oct 19, 2004 12:02 pm
- Forum: Sunday Runs, Rideouts, Track days ,Rallys, Events
- Topic: bike club
- Replies: 5
- Views: 1226
Hi Meatball :D Welcome onboard :D Always Glad to hear about another bike friendly pub. So tell us about you rclub, howmany members? Ride outs to where ect. Pete.l And for those geographically challenged. Where Mossely. (is n't that where Luke skywalker came from) how fast do I have to go to reach or...
- Tue Oct 19, 2004 9:12 am
- Forum: Workshop
- Topic: Starter Motor Removal Difficult
- Replies: 8
- Views: 1200
- Tue Oct 19, 2004 8:59 am
- Forum: Workshop
- Topic: Starter Motor Removal Difficult
- Replies: 8
- Views: 1200
- Mon Oct 18, 2004 1:27 pm
- Forum: Workshop
- Topic: Starter Motor Removal Difficult
- Replies: 8
- Views: 1200
Hi Brownie, mine was totally caked in sh1t down the back, from a few years of burnt on road kill I imagine. You should only need to remove the two forward facing bolts and the HT lead. Then try wiggling the end you removed the bolts up and down and pull to the lefthand side as you look at the bike f...
- Fri Oct 15, 2004 8:03 am
- Forum: Workshop
- Topic: carb removal
- Replies: 5
- Views: 695
- Thu Oct 14, 2004 4:59 pm
- Forum: Workshop
- Topic: carb removal
- Replies: 5
- Views: 695
- Thu Oct 14, 2004 4:55 pm
- Forum: Bike Chat
- Topic: Ride Magazine
- Replies: 28
- Views: 2541