Just fitted front intake vacuum adapter and hoses to allow carb balancing using AMCQ46's "how to balance carbs" - much appreciated write up, thanks.
Next task is finishing off my R/R replacement
Search found 81 matches
- Wed Feb 08, 2012 9:23 pm
- Forum: General Chat
- Topic: what have you done to your "bike" today
- Replies: 22452
- Views: 1811036
- Mon Feb 06, 2012 7:38 pm
- Forum: The Workshop Knowledgebase
- Topic: Regulator / Rectifier Modification
- Replies: 78
- Views: 76684
Re: Regulator / Rectifier Modification
To get the connector out there is a small barb on the back of the copper terminal and this acts as an anti backout feature to stop the terminal being pulled out. So you need a small watchmaker screwdriver or similar narrow but stiff blade to push into the socket from the side that would normally be...
- Mon Feb 06, 2012 4:53 pm
- Forum: The Workshop Knowledgebase
- Topic: Regulator / Rectifier Modification
- Replies: 78
- Views: 76684
Re: Regulator / Rectifier Modification
Could somebody please tell me what size female connectors I need to buy to fit an R6 regulator? I just removed the standard terminals from the connector shell, put heatshrink over the exposed copper to stop any risk of short circuiting and then put them onto the correct pins on the r6 R/R and fitte...
- Sat Feb 04, 2012 8:51 pm
- Forum: The Workshop Knowledgebase
- Topic: Regulator / Rectifier Modification
- Replies: 78
- Views: 76684
Re: Regulator / Rectifier Modification
Thanks for the replies....I am just trying to get the individual connector dimension to do the same job as the original link but I guess a trip to Halfords with my R/R will work. Where are you based mate? I have a set of electrical connectors and insulators if you're local. he Thanks for the offer,...
- Sat Feb 04, 2012 8:21 pm
- Forum: The Workshop Knowledgebase
- Topic: Regulator / Rectifier Modification
- Replies: 78
- Views: 76684
Re: Regulator / Rectifier Modification
Thanks for the replies....I am just trying to get the individual connector dimension to do the same job as the original link but I guess a trip to Halfords with my R/R will work.
- Sat Feb 04, 2012 3:35 pm
- Forum: The Workshop Knowledgebase
- Topic: Regulator / Rectifier Modification
- Replies: 78
- Views: 76684
Re: Regulator / Rectifier Modification
Could somebody please tell me what size female connectors I need to buy to fit an R6 regulator?
- Mon Jan 30, 2012 9:26 pm
- Forum: Workshop
- Topic: Tail Light Help?
- Replies: 6
- Views: 740
Re: Tail Light Help?
Good point - I will check that out. ThanksAMCQ46 wrote:The broken tab looks like it is stuck in the female connector, Make sure you remove that before you try and plug it all back together
- Mon Jan 30, 2012 8:00 pm
- Forum: Workshop
- Topic: Tail Light Help?
- Replies: 6
- Views: 740
Re: Tail Light Help?
I've found the cause but not the solution - there are 3 wires on a connector which is pushed onto the bulb holder. The bulb holder should have 3 metal tabs onto which the connector locates. On mine, the middle tab has gone AWOL so only 2 out of the 3 wires are connected. Looks like I will have to ge...
- Sun Jan 29, 2012 9:26 pm
- Forum: General Chat
- Topic: what have you done to your "bike" today
- Replies: 22452
- Views: 1811036
Re: what have you done to your "bike" today
Nice polishing work there mac :thumbup: Yesterday I finished the top end rebuild on this one http://i734.photobucket.com/albums/ww348/amcq46/598d5891.jpg http://i734.photobucket.com/albums/ww348/amcq46/8fc80a2b.jpg And today i went out for competition on this one, very icy in the bomb holes and gro...
- Sun Jan 29, 2012 8:42 pm
- Forum: Workshop
- Topic: Tail Light Help?
- Replies: 6
- Views: 740
Re: Tail Light Help?
Just back online - thanks for the replies.
I swapped bulbs which confirmed the problem is not the bulb. The wires in the connector look a bit green/corroded so this may be the problem. I'll have a look during the week.
I swapped bulbs which confirmed the problem is not the bulb. The wires in the connector look a bit green/corroded so this may be the problem. I'll have a look during the week.
- Sun Jan 29, 2012 10:54 am
- Forum: Workshop
- Topic: Tail Light Help?
- Replies: 6
- Views: 740
Tail Light Help?
One of my tail lights is not working.........thought it was just the bulb (both brake lights work fine). Bought and fitted new bulb and still it doesn't work :thumbdown: I confess to being not very "switched on "electrically - does anyone out there have some tips on finding the possible ca...
Re: downpipes
Wish my bike looked that clean Wicky
Re: vfr bars
Thanks for that, makes me a bit more comfortable about cutting the fairing - may get away with touch up spray maybe.Wicky wrote:Plastic is black abs
For those who have done this, what is the best tool to use....Dremel, Junior Hacksaw or what?
Thanks
Re: vfr bars
I'm also a bit nervous about cutting the fairing.........presume it is mandatory if you fit VFR bars (other than master cylinders)?
Don't really want the cost and hassle of a respray - are the fairings white under the paint, or moulded roughly in the colour they are sprayed in? Mine is a black one.
Don't really want the cost and hassle of a respray - are the fairings white under the paint, or moulded roughly in the colour they are sprayed in? Mine is a black one.