KILL BILL
- alanfjones1411
- Posts: 2791
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: KILL BILL
There's no accounting for some peoples taste,and probably cost a pretty penny to be painted.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
-
- Posts: 975
- Joined: Mon Nov 14, 2011 2:00 pm
- Location: Whaplode Drove, Lincolnshire
Re: KILL BILL
they kind of missed the point of the bump on the undertray too
Re: KILL BILL
One off paint job, it says.
Can't imagine anyone wanting another one ...
Can't imagine anyone wanting another one ...
Two bikes, still only four cylinders!
Re: KILL BILL
Oh dear!
- firestorm_al
- Site Admin
- Posts: 754
- Joined: Mon May 20, 2002 9:56 am
- Location: Aberdeen (Scotland - UK)
- Contact:
Re: KILL BILL
Talking of one-off paint jobs, I had forgotten about these photo's I took at Thunder In the Glens a few years ago.
Wood you think it was possible?!
Wood you think it was possible?!
Re: KILL BILL
Oak-y-dokey...firestorm_al wrote:Talking of one-off paint jobs, I had forgotten about these photo's I took at Thunder In the Glens a few years ago.
DSC_2992.JPG
DSC_2991.JPG
DSC_2990.JPG
DSC_2989.JPG
Wood you think it was possible?!
Notty my cup of tea...
When he sells it will he be plying his trade ?
A thin veneer some peoples taste...!
Enough, enough I'll get me axe on the way out...
Making up since 2007, sometimes it's true...Honest...
Re: KILL BILL
Surely that wooden work!
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: KILL BILL
Birch you cant guese what it is yet....
Making up since 2007, sometimes it's true...Honest...
Re: KILL BILL
Yew wooden belive it !
You Alder enough yet ?
You Alder enough yet ?
Making up since 2007, sometimes it's true...Honest...
- Pete.L
- Forum Health And Safety Officer
- Posts: 7216
- Joined: Fri Sep 26, 2003 5:09 pm
- Location: Bristol
Re: KILL BILL
That must have been a pain in the Ash to paint.
My new ride is a bit of a Howler and I love to make her Squeal
Re: KILL BILL
The Kill Bill bike... previous owner did the job himself... Looks like the current owner is struggling to move it on... Pretty sure it was up for more and have seen it on Facebook recently for less... job itself looks nice but wouldn't want it on my storm. As so often with custom work especially paintwork you limit your market.. but someone out there will like it.
-
- Posts: 590
- Joined: Wed Jun 15, 2016 9:09 am
- Location: Chester, Cheshire
Re: KILL BILL
Someone's really spruced up that wooden one...
Likewise, absolutely not my cup of teak
Likewise, absolutely not my cup of teak
Re: KILL BILL
Yew wouldn't believe someone would want to do such a thing. TBH I actually quite like the wooden one. It's more tasteful than the Kill Bill.
==============================Enter the Darkside