Mark Krieger's Firestorm instructions are based on manual tensioner installation procedure written here in the Workshop Knowledgebase, and cleary states finger tight then back it out 1/8 turn before locking it up. Not sure how you missed this.Stepkevh wrote:There's one thing i dont understand...
I was reading up on Kriegers website last night that for setting MCCT's tension, you turn them by hand until all slack in the chain is gone and then lock it off.
While with this stopper mod, we should have slack.
Is this just because we still use the original CCT's and they rod must be able to move ?
http://www.clems-garage.com/CCT/VTR1000 ... ctions.htm
13) Then continue turning while still finger tightening the cam chain tensioner to make sure all play is out, then back the thru bolt 1/8 turn and tighten lock nut. (static setting)