Firestorm/ blade 954 forks (clip ons)

Where all the workshop knowledge lives together.
Post Reply
User avatar
jasonbrownett
Posts: 46
Joined: Thu Feb 08, 2018 11:45 pm

Firestorm/ blade 954 forks (clip ons)

Post by jasonbrownett »

Hi guys I need some advice. Have fitted fireblade 954rr2 forks to my storm as have read somewhere it was a straight forward swap and to be honest it is. My problem is the clip on bars are too low and the switch gear and part of brake lever fouls the fairing. Anyone know what clip ons will work. Managed to fit clip ons (they are not blade one but after market ones) by swapping left for right so instead of downward sweep they sweep up but would like to get original riding position if possible. Image Image


Sent from my iPhone using Tapatalk
User avatar
Kev L
Posts: 11209
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Firestorm/ blade 954 forks (clip ons)

Post by Kev L »

I used SV race parts 3.5” rise bars on mine and with careful setup they clear everything. There are other bars, used by others who have done this conversion.
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
User avatar
Kev L
Posts: 11209
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Firestorm/ blade 954 forks (clip ons)

Post by Kev L »

Image


Sent from my iPhone using Tapatalk
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Post Reply