Hey all, it's been a productive day in the cave today, but has left me wanting some bits! I thought I'd ask here before parting with mega bucks at the breakers. So here goes...
I'm after a 3 pin connector with wires still attached for the rear light (I'm missing one!)
Similar to the rear light, 3 pin connector for the front sidelight with wires attatched.
Standard undertray (any condition)
Side fairing bolts x4
Mirrors L & R
A set of headers/downpipes (maybe if i can afford them !) as mine have pretty much rusted away...
Cheers
Jamie
Wanted, a few bits and bobs...
Moderator: VTRDark
- agentpineapple
- Posts: 15123
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Wanted, a few bits and bobs...
I have headers and fairing bolts mate
I also have the front sidelight wiring and possibly an original undertray, i'll check for that in the morning mate.
I also have the front sidelight wiring and possibly an original undertray, i'll check for that in the morning mate.
Last edited by agentpineapple on Sun Nov 23, 2014 9:02 pm, edited 1 time in total.
HEY YOU GUYS!!!!!!
Re: Wanted, a few bits and bobs...
I'll bring the spare loom with the R/R connector for your stunt boik when you get the other bits in - that has rear and side light connectors.
It may be that your whole purpose in life is simply to serve as a warning to others.
VTR Firestorm and other bikes t-shirts
VTR Firestorm and other bikes t-shirts
Re: Wanted, a few bits and bobs...
Wiring both ends in stock.
Undertray in stock.
Headers in stock.
Fairing bolts in stock.
Don't have any std mirrors but do have a pair that clamp to bars if you have flat bars on it.
So any of those bits that Wicky or Marty cant supply give us a shout.
Frank.
Undertray in stock.
Headers in stock.
Fairing bolts in stock.
Don't have any std mirrors but do have a pair that clamp to bars if you have flat bars on it.
So any of those bits that Wicky or Marty cant supply give us a shout.
Frank.
Making up since 2007, sometimes it's true...Honest...
Re: Wanted, a few bits and bobs...
You guys :rock: :worship:
So if I can take Wicky up on his offer of wiring bits
I'll PM you Frank and AP about headers, undertray and fairing bolts.
I'm reinstating ol' Smokin' Joe. original bodywork with clipons etc. The old mirrors are ferked but I've found some from china for £20 which should do the job!
All the fairing bolts were anodised purple and sheared off in the fairing brackets, so I've drilled and tapped them all today.
Jamie
So if I can take Wicky up on his offer of wiring bits
I'll PM you Frank and AP about headers, undertray and fairing bolts.
I'm reinstating ol' Smokin' Joe. original bodywork with clipons etc. The old mirrors are ferked but I've found some from china for £20 which should do the job!
All the fairing bolts were anodised purple and sheared off in the fairing brackets, so I've drilled and tapped them all today.
Jamie
Jamie