Stator plugs wanted

Moderator: VTRDark

Post Reply
chris freckle
Posts: 91
Joined: Wed Nov 13, 2013 9:30 pm
Location: North West

Stator plugs wanted

Post by chris freckle »

Does anyone have info on the alternator 3 pin plug , as in where I can get one from , both sides if poss. Chris :?:
User avatar
sirch345
Site Admin
Posts: 21669
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: Stator plugs wanted

Post by sirch345 »

User avatar
E.Marquez
Posts: 635
Joined: Wed May 30, 2012 1:27 pm

Re: Stator plugs wanted

Post by E.Marquez »

chris freckle wrote: Thu Nov 09, 2017 10:17 pm Does anyone have info on the alternator 3 pin plug , as in where I can get one from , both sides if poss. Chris :?:
You want an OEM one or a modern sealed type as used on MOSFET RRs?
Here is the OEM set fro the Stator plug to wiring harness
http://www.cycleterminal.com
YC250-3
and for Wiring harness to stock RR
5P250-312


If you have to replace both sides, why not upgrade to better MOSFET RR and the plugs at the same time.

Here are the ones for the MOSFET RR
http://www.cycleterminal.com/furukawa-qlw-250.html
Marquez Motorcycle Services
Solutions to recurring maintenance
Race/Adventure ride event prep
Post event services

Total Rider
Your path to a TX motorcycle license
And advanced Rider training
chris freckle
Posts: 91
Joined: Wed Nov 13, 2013 9:30 pm
Location: North West

Re: Stator plugs wanted

Post by chris freckle »

Cheers Guys
I sort of wanted to keep it standard! Clearly that is stupid when I have a set of JE pistons on the way. I will look into what is best in the sealed world I think. :think:
Post Reply