discs wanted

Moderator: VTRDark

Post Reply
User avatar
fabiostar
Posts: 7542
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

discs wanted

Post by fabiostar »

yes yes its not honda discs but i know we have some hoarders .

anybody got a set of Apriia pegaso.millie,tuono discs, poss even ducati discs might be the same? as long as they arnt deep dish units.. 320mm perrlease.

i dont wana go spending the kids money on new ones incase this doesnt work :eek2

god dont ask lol
the older i get,the faster i was :lol:
User avatar
alanfjones1411
Posts: 2789
Joined: Thu May 21, 2015 3:33 pm
Location: watford

Re: discs wanted

Post by alanfjones1411 »

Ducati 916/996 discs are 320mm with a 10mm offset.They were on my storm anyway.Perhaps Mac will check as he has the bike now.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
User avatar
fabiostar
Posts: 7542
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: discs wanted

Post by fabiostar »

alanfjones1411 wrote: Tue Jan 01, 2019 11:54 am Ducati 916/996 discs are 320mm with a 10mm offset.They were on my storm anyway.Perhaps Mac will check as he has the bike now.
happy days that sounds like a plan :clap: :clap:
the older i get,the faster i was :lol:
User avatar
AMCQ46
Posts: 16535
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: discs wanted

Post by AMCQ46 »

i have a set of Aprillia brembo discs ,,, you want me to measure them?
AMcQ
User avatar
fabiostar
Posts: 7542
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: discs wanted

Post by fabiostar »

AMCQ46 wrote: Tue Jan 01, 2019 5:04 pm i have a set of Aprillia brembo discs ,,, you want me to measure them?
happy days Al. centre bore, bolt to bolt and that will confirm if theres any differences to what macs given me incase they changed at some point
the older i get,the faster i was :lol:
User avatar
AMCQ46
Posts: 16535
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: discs wanted

Post by AMCQ46 »

quick measurements

offset = 5mm
centre hole = 64mm dia
bolt pattern . = 6 x 8mm dia on an 80mm PCD
AMcQ
User avatar
AMCQ46
Posts: 16535
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: discs wanted

Post by AMCQ46 »

and i have a pair of spacers to increase the offset by 2.5mm
AMcQ
User avatar
fabiostar
Posts: 7542
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: discs wanted

Post by fabiostar »

AMCQ46 wrote: Tue Jan 01, 2019 10:19 pm and i have a pair of spacers to increase the offset by 2.5mm
cheers Al, well i hope iv got my measurments right cause i just bought a set of second hand ones, they are wave discs,not really in keeping but they are cheap so couldnt pass them up..if your selling those spacers i might be interested but will know when they get here. :thumbup:
the older i get,the faster i was :lol:
User avatar
AMCQ46
Posts: 16535
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: discs wanted

Post by AMCQ46 »

the brembo discs are not wavy, and they are spare, so if you want to have a more classic look give me a shout.

i took them off my bike as a test to see if they were the source of my front end clunk/judder when braking at low speed. the runout is well inside specification, but when i fitted new galfer discs the clunk was gone!!

but if you want to try them and see if they are OK on your bike then if they are OK we can do a deal.
AMcQ
User avatar
fabiostar
Posts: 7542
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: discs wanted

Post by fabiostar »

happy days Al. il see when these ones come and use them as a test to see whats required to get them fitted and let you know :clap: :clap:
the older i get,the faster i was :lol:
Post Reply