trick bitz bar risers

General Bike chat
Post Reply
haynesjones66
Posts: 411
Joined: Wed Jul 18, 2018 9:44 pm
Location: sunny west wales

trick bitz bar risers

Post by haynesjones66 »

has anybody used these? i like the fact that you dont have to drill the top yoke.
grumpyfrog
Posts: 1545
Joined: Thu Apr 14, 2011 1:22 pm
Location: Tayside

Re: trick bitz bar risers

Post by grumpyfrog »

Go down 16 posts..
Don't hassle me
I'll get there at some time
haynesjones66
Posts: 411
Joined: Wed Jul 18, 2018 9:44 pm
Location: sunny west wales

Re: trick bitz bar risers

Post by haynesjones66 »

ah, theyre a bit different to what i've seen.the ones i saw clamped onto the forks and the bar clamps sit back on the headstock, alowing any 7/8 bars to be fitted. i cant do ebay linkys
grumpyfrog
Posts: 1545
Joined: Thu Apr 14, 2011 1:22 pm
Location: Tayside

Re: trick bitz bar risers

Post by grumpyfrog »

Go to "pump my ride", 14th post down by Mag. If those are what your looking at he loves them.
You will still need to trim the fairing and fit new break lines. Clutch should he ok, but he changed them at the same time.
Don't hassle me
I'll get there at some time
grumpyfrog
Posts: 1545
Joined: Thu Apr 14, 2011 1:22 pm
Location: Tayside

Re: trick bitz bar risers

Post by grumpyfrog »

Oh and add 50mm to the horn wires.
Don't hassle me
I'll get there at some time
haynesjones66
Posts: 411
Joined: Wed Jul 18, 2018 9:44 pm
Location: sunny west wales

Re: trick bitz bar risers

Post by haynesjones66 »

top man, thanks
Post Reply