Side stand loose

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
User avatar
podman
Posts: 597
Joined: Tue Nov 15, 2016 4:04 pm

Side stand loose

Post by podman » Tue May 29, 2018 8:38 am

Just about to set off for a few days in Wales and noticed one of the side stand bolts is loose and wont do up. Should there be a nut behind it or has the thread gone do we think? Thanks all.

User avatar
MacV2
Posts: 13211
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Side stand loose

Post by MacV2 » Tue May 29, 2018 9:07 am

If you look at these fiche pics you'll see that the Side stand mounting plate bolts on to one of the engine plates...

A/
https://www.ronayers.com/oemparts/a/hon ... 3324/stand

B/
https://www.ronayers.com/oemparts/a/hon ... k-absorber

In B/ pic No.15 passes all the way through with the nut on the far side. That bolt is not on the A/ fiche pic...

IIRC the bolt No.6 in A/ is threaded into the plate No.2 in B/

Hope that helps.
Lowering the tone since 2007...

User avatar
podman
Posts: 597
Joined: Tue Nov 15, 2016 4:04 pm

Re: Side stand loose

Post by podman » Tue May 29, 2018 4:40 pm

MacV2 wrote:
Tue May 29, 2018 9:07 am
If you look at these fiche pics you'll see that the Side stand mounting plate bolts on to one of the engine plates...

A/
https://www.ronayers.com/oemparts/a/hon ... 3324/stand

B/
https://www.ronayers.com/oemparts/a/hon ... k-absorber

In B/ pic No.15 passes all the way through with the nut on the far side. That bolt is not on the A/ fiche pic...

IIRC the bolt No.6 in A/ is threaded into the plate No.2 in B/

Hope that helps.
Thats brilliant mate. Thanks very much. Its bolt 15 from B) fiche thats loose, it wont unscrew so maybe the nuts just slackened off....if not that and the perhaps the part No 19 pin dowel has gone awol..In Wales now so will have a look in the morning, had a fantastic trip up.

User avatar
podman
Posts: 597
Joined: Tue Nov 15, 2016 4:04 pm

Re: Side stand loose

Post by podman » Fri Jun 01, 2018 7:46 pm

MacV2 wrote:
Tue May 29, 2018 9:07 am
If you look at these fiche pics you'll see that the Side stand mounting plate bolts on to one of the engine plates...

A/
https://www.ronayers.com/oemparts/a/hon ... 3324/stand

B/
https://www.ronayers.com/oemparts/a/hon ... k-absorber

In B/ pic No.15 passes all the way through with the nut on the far side. That bolt is not on the A/ fiche pic...

IIRC the bolt No.6 in A/ is threaded into the plate No.2 in B/

Hope that helps.
Mac, do you or anyone else have a spare of this bolt 15 from the B) fiche and its matching nut, please.

Mine will get to a certain tightness and then slacken off again, so the thread is buggered on one or most likely both the bolt and nut now.

Much appreciated.

User avatar
MacV2
Posts: 13211
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Side stand loose

Post by MacV2 » Fri Jun 01, 2018 8:33 pm

Possibly but I will have to have a rake tomorrow...

I had all the bikes pulled out today... :lol: :lol:

If you had posted this a AM instead of PM I could have already told you yeah or neigh... :roll:

I'll pop one off another bike & see if I have a match... :thumbup:
Lowering the tone since 2007...

User avatar
VTRDark
Posts: 19846
Joined: Sun Mar 18, 2012 9:24 pm

Re: Side stand loose

Post by VTRDark » Sat Jun 02, 2018 12:49 am

Possibly but I will have to have a rake tomorrow...
Don't forget to mow the lawn too :lol:
==============================Enter the Darkside

User avatar
MacV2
Posts: 13211
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Side stand loose

Post by MacV2 » Sat Jun 02, 2018 7:14 am

VTRDark wrote:
Sat Jun 02, 2018 12:49 am
Possibly but I will have to have a rake tomorrow...
Don't forget to mow the lawn too :lol:
Did that on Thursday, smarty pants...well more like lowering the weeds TBH... :lol:
Lowering the tone since 2007...

User avatar
MacV2
Posts: 13211
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Side stand loose

Post by MacV2 » Sat Jun 02, 2018 11:53 am

Dons a brown robe, waves hand in a circular motion & utters the words...

Image

Image


Obi Wan Kfrankie...
Lowering the tone since 2007...

User avatar
podman
Posts: 597
Joined: Tue Nov 15, 2016 4:04 pm

Re: Side stand loose

Post by podman » Sat Jun 02, 2018 1:30 pm

It is Obi Wan...Please send to me in the Millennium Falcon at light speed... :thumbup:

Thanks mate.

User avatar
MacV2
Posts: 13211
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Side stand loose

Post by MacV2 » Sat Jun 02, 2018 6:08 pm

podman wrote:
Sat Jun 02, 2018 1:30 pm
It is Obi Wan...Please send to me in the Millennium Falcon at light speed... :thumbup:

Thanks mate.
Snail it is mail you for...
Lowering the tone since 2007...

Post Reply