Petcock woes

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
davebrannigan
Posts: 42
Joined: Fri Mar 29, 2019 6:58 pm
Location: Newport S. Wales

Petcock woes

Post by davebrannigan » Wed May 22, 2019 7:01 pm

Hi Folks, After flooding my engine with fuel following the failure of the fuel strainer I discovered that after cleaning the tank out and replacing the strainer the petcock was still passing fuel. The valve rubber seat was all distorted.

I bought a repair kit off the internerd and when it arrived the spring was squished flat. Waited a few weeks for a replacement and went to fit it tonight but there's a problem. With the normal spring pressure applied to the valve there is a clear gap (visible through the fuel take off ports) between the valve seat and the rubber so fuel still passes. With it stripped I need to apply a fair bit of finger pressure to get it to seat. It cannot be right. Anyone else had issues with this and where can I get a repair kit that works? I really don't want to flood the crankcases with fuel again...

Cheers

Dave

davebrannigan
Posts: 42
Joined: Fri Mar 29, 2019 6:58 pm
Location: Newport S. Wales

Re: Petcock woes

Post by davebrannigan » Thu Aug 29, 2019 2:19 pm

I cant believe I'm the only one to have had an issue with this, but to tie up a loose end I can tell you that I bought an OEM repair kit and it worked fine. Don't waste your money on pattern parts for this item!

Dave

User avatar
fabiostar
Posts: 6214
Joined: Sat Jun 01, 2013 2:53 pm
Location: sunny belfast

Re: Petcock woes

Post by fabiostar » Thu Aug 29, 2019 6:50 pm

iv been down that road aswell, oem every time :thumbup:
the older i get,the faster i was :lol:

minx0071
Posts: 5
Joined: Mon Sep 30, 2019 4:03 pm

Re: Petcock woes

Post by minx0071 » Tue Oct 01, 2019 10:51 am

Hi,

I currently have this issue.
Unfortunately bought non OEM petcock kit and diaphram is not seating. Problem i have is that i am struggling to get OEM kit...but also i need the other sealings for the shut off tap, which is currently passing fuel when closed - the rubber seal with 4 holes is perished and broken.
I have spoken to some Honda dealers and the answer i get is that they dont supply overhaul kits for the petcock, you just have to buy a new one for £275 !!

Anyway, i am currently looking to modify the fuel system i.e. incorporate shut off valves in the 2 fuel lines that can be shut off when bike not in use.

Just wondered if anyone has done any mod similar or maybe i need to make a new post ?

Thanks.

davebrannigan
Posts: 42
Joined: Fri Mar 29, 2019 6:58 pm
Location: Newport S. Wales

Re: Petcock woes

Post by davebrannigan » Tue Oct 01, 2019 11:02 am

I bought part number 16953ML0034 Cover set Petcock for around £50. Job done.

jchesshyre
Posts: 504
Joined: Wed Jun 15, 2016 8:09 am
Location: Chester, Cheshire

Re: Petcock woes

Post by jchesshyre » Tue Oct 01, 2019 4:04 pm

Yup, the pattern repair kits are shite. I went through three before just buying a used complete tap for the same money.

minx0071
Posts: 5
Joined: Mon Sep 30, 2019 4:03 pm

Re: Petcock woes

Post by minx0071 » Wed Oct 02, 2019 2:01 pm

Nice one thanks, will see if i can find that kit...otherwise may just buy 2nd hand petcock

minx0071
Posts: 5
Joined: Mon Sep 30, 2019 4:03 pm

Re: Petcock woes

Post by minx0071 » Wed Oct 02, 2019 2:03 pm

Dave, can i please ask where you bought 16953ML0034 from ? Cant seem to find anywhere in UK....

minx0071
Posts: 5
Joined: Mon Sep 30, 2019 4:03 pm

Re: Petcock woes

Post by minx0071 » Wed Oct 02, 2019 2:05 pm

Forget that found it thanks

davebrannigan
Posts: 42
Joined: Fri Mar 29, 2019 6:58 pm
Location: Newport S. Wales

Re: Petcock woes

Post by davebrannigan » Wed Oct 02, 2019 2:25 pm

For £1200 you can have mine. It comes with a complete bike! Decided to sell my bike now.

Cheers

minx0071
Posts: 5
Joined: Mon Sep 30, 2019 4:03 pm

Re: Petcock woes

Post by minx0071 » Wed Oct 02, 2019 3:33 pm

Thanks....thinking of selling mine as well :D

User avatar
Wicky
Posts: 7591
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:

Re: Petcock woes

Post by Wicky » Wed Oct 02, 2019 5:05 pm

minx0071 wrote:
Wed Oct 02, 2019 2:03 pm
Dave, can i please ask where you bought 16953ML0034 from ? Cant seem to find anywhere in UK....

https://www.davidsilverspares.co.uk/par ... 953ML0034/
It may be that your whole purpose in life is simply to serve as a warning to others.

Post Reply