quickshifter

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

quickshifter

Post by fabiostar »

ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me :eek2 :eek2
the older i get,the faster i was :lol:
User avatar
Kev L
Posts: 11209
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: quickshifter

Post by Kev L »

Oh my god!! :Beer Popcorn: good luck.
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: quickshifter

Post by fabiostar »

Kev L wrote: Sat Feb 15, 2020 8:07 am Oh my god!! :Beer Popcorn: good luck.
yeah Kev what could possibly go wrong :lol: :lol:
the older i get,the faster i was :lol:
User avatar
Kev L
Posts: 11209
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: quickshifter

Post by Kev L »

:D :thumbup:
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: quickshifter

Post by fabiostar »

i have actually finished the internet, no really iv read every word written about storms and shifters and no two are the same nor is there a simple ,do this answer? sweet jesus finding out were two green wires go to cant be that hard. :eek2 :eek2
the older i get,the faster i was :lol:
User avatar
MacV2
Posts: 17416
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: quickshifter

Post by MacV2 »

fabiostar wrote: Sat Feb 15, 2020 3:14 pm i have actually finished the internet, no really iv read every word written about storms and shifters and no two are the same nor is there a simple ,do this answer? sweet jesus finding out were two green wires go to cant be that hard. :eek2 :eek2
Have you tried contacting the makers...healtech isn't it...
Making up since 2007, sometimes it's true...Honest...
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: quickshifter

Post by fabiostar »

MacV2 wrote: Sat Feb 15, 2020 3:40 pm
fabiostar wrote: Sat Feb 15, 2020 3:14 pm i have actually finished the internet, no really iv read every word written about storms and shifters and no two are the same nor is there a simple ,do this answer? sweet jesus finding out were two green wires go to cant be that hard. :eek2 :eek2
Have you tried contacting the makers...healtech isn't it...
yeah that confused things even more :eek2 :eek2
the older i get,the faster i was :lol:
tony.mon
Posts: 15938
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: quickshifter

Post by tony.mon »

Installation guide, Healtech QS1:

Step One: Just connect some wires, try it.
Step Two: If your gearbox ceases to work, fit replacement gearbox from spare bike, switch wires to somewhere else and repeat steps 1 and 2 until satisfied, or until Mac runs out of spare gearboxes.


Hope that helps :thumbup:
It's not falling off, it's an upgrade opportunity.
tony.mon
Posts: 15938
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: quickshifter

Post by tony.mon »

There are several YouTube videos, try watching those.
Or funny cats, that will take your mind off it.
It's not falling off, it's an upgrade opportunity.
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: quickshifter

Post by fabiostar »

[quote=tony.mon post_id=480934 time=1581790220 user_id=2119]
There are several YouTube videos, try watching those.
Or funny cats, that will take your mind off it.


[/quotid be better watching funny cats cause i can find shifters fitted to all manner except an actual storm :clap: .

iv been trying to find two people who say the same way of fitting them ,so far the closest is

into the coils, not sure on colour of wire to cut into.
into the pulse generator wires, does it matter which wire goes to which?
into the loom at the ECU end of things,lord knows which of those wires?

wiring diagrams from healtech? none the wiser :eek2

youtube has eveybike under the sun except?? yup you guessed it :wtf:
the older i get,the faster i was :lol:
User avatar
sirch345
Site Admin
Posts: 21669
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: quickshifter

Post by sirch345 »

fabiostar wrote: Fri Feb 14, 2020 11:20 pm ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me :eek2 :eek2

A good job my memory is working :wink:

Micky (mik_str) fitted one to his Storm. Here's the link:- viewtopic.php?f=9&t=41842&p=455879&hilit

Chris.
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: quickshifter

Post by fabiostar »

sirch345 wrote: Sat Feb 15, 2020 8:21 pm
fabiostar wrote: Fri Feb 14, 2020 11:20 pm ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me :eek2 :eek2

A good job my memory is working :wink:

Micky (mik_str) fitted one to his Storm. Here's the link:- viewtopic.php?f=9&t=41842&p=455879&hilit

Chris.

happy days chris. well iv got mine wired in, is it right? il find out when it bursts into flames :eek2 . once the sensor wire arrives il go try it and that will tell the tale :thumbup:
the older i get,the faster i was :lol:
tony.mon
Posts: 15938
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: quickshifter

Post by tony.mon »

Have you got the phone app downloaded and paired so that you can set it up?
I'd suggest long cut periods at first.
It's not falling off, it's an upgrade opportunity.
User avatar
sirch345
Site Admin
Posts: 21669
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: quickshifter

Post by sirch345 »

fabiostar wrote: Sat Feb 15, 2020 10:21 pm
sirch345 wrote: Sat Feb 15, 2020 8:21 pm
fabiostar wrote: Fri Feb 14, 2020 11:20 pm ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me :eek2 :eek2

A good job my memory is working :wink:

Micky (mik_str) fitted one to his Storm. Here's the link:- viewtopic.php?f=9&t=41842&p=455879&hilit

Chris.

happy days chris. well iv got mine wired in, is it right? il find out when it bursts into flames :eek2 . once the sensor wire arrives il go try it and that will tell the tale :thumbup:
Fingers crossed and everything else it all goes well Rob :thumbup:

Chris.
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: quickshifter

Post by fabiostar »

well it didnt burst into flames, i wired it into the pulse coil wires and tried it this morning, downloaded the app and the bikes running fine and the app shows the same revs as my rev counter so alls good so far.

@tony , atm iv not touched the settings iv just left them as they were on the other bike so il see if that suits mine.

Rob de Hoo is sending me a new sensor wire so soon as that arrives il see if it all works :thumbup:
the older i get,the faster i was :lol:
Post Reply