Dyno Day 22nd June 2013.

General Bike chat
Post Reply
User avatar
AMCQ46
Posts: 16735
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Dyno Day 22nd June 2013.

Post by AMCQ46 »

£10 deposits to me via paypal. send me a PM and i will give you the email details
AMcQ
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Dyno Day 22nd June 2013.

Post by agentpineapple »

lloydie wrote:
bigspanishmarty wrote:sod the dyno run, i'm more interested in the free cup of tea and bacon buttie......... :burp:
I think their £1 bsm well they were last time
well i refuse to go now.............. :(

storms off in a huff!!!!!!!
HEY YOU GUYS!!!!!!
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: Dyno Day 22nd June 2013.

Post by Virt »

Dearest papa cannot make it any longer, so the matte black VTR will not be there to put you all to shame. Thought I'd let you know so you can stop having nightmares and the such :lol: Now you just have a 33bhp hornet to crap on. T'is bad times :thumbdown:
Slowly approaching the more bikes than birthdays achievement
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Dyno Day 22nd June 2013.

Post by lloydie »

Virt wrote:Dearest papa cannot make it any longer, so the matte black VTR will not be there to put you all to shame. Thought I'd let you know so you can stop having nightmares and the such :lol: Now you just have a 33bhp hornet to crap on. T'is bad times :thumbdown:
Never mind , next you'll be pulling out !
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: Dyno Day 22nd June 2013.

Post by Virt »

lloydie wrote: Never mind , next you'll be pulling out !
Well I don't want a child at this age do I?! :lol:
Slowly approaching the more bikes than birthdays achievement
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Dyno Day 22nd June 2013.

Post by VTRDark »

lloydie wrote:Never mind , next you'll be pulling out !



Well I don't want a child at this age do I?! :lol:
:lol: :lol: :lol: :lol: :clap: :clap: :clap:

(:-})
==============================Enter the Darkside
User avatar
AMCQ46
Posts: 16735
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Why don't we have a Dyno Day ?

Post by AMCQ46 »

BUMP BUMP BUMP
Those paid so far;
Leevtr
Lloydie
CyberCarl
BSM
Geodude
AMcQ46
Rob
griff
Playerone
Virt and his dad [who wont be coming]
Gaz

So still only 12 when we need 15 :



22nd june

Projex Motorcycle Engineers
Unit 6 Spinners End Industrial Est,
Oldfields,
Cradley Heath,
West Midlands,
B64 6BS

send deposits to me via paypal - £10 gets you 1 dyno run and a bacon bap / cup of tea


can we have an update on those who are attending........even though you wont get your deposit back [sorry that was the deal] it would still be good to know who is turning up when.

I will be getting there about 10am and will pay up the £120 which covers teh 1st run for all those named above, and plan to stay till about 3.

if you want more runs they are £10 each and you can pay on the day

My plans are to test the current baseline - new engine, DR Honda trumpets & BMC road filter, then I want to go back to std trumpets, them back to STD trumpets & filter.
so I will have a good selection of tools with me if anyone is travelling a big distance and rather than lug all their own kit wants to borrow some feel free.

Oh and I will need to borrow a STD filter, as I must have given my spare one away at some point
AMcQ
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Dyno Day 22nd June 2013.

Post by VTRDark »

I have a standard type hi flo filter you can use if you want unless Lloyd has one to save me lugging it all that way. I shall also be bringing a selection of tools, A/F screwdriver, carbtune balancer, I may even buy a can of carb cleaning spray to bring with me. And the way I feel right now, I think I shall bring some Nurofen plus (my leg's throbbing, OW, achee achee :( :( :( ) I have just got back in from a long hard ride. :!:

Work I am planning on doing is as follows:
Get my baseline, see where it's at currently. With my BMC Street filter get it spot on, so however many runs it takes. Then once that's done I would like to chuck a standard filter in and do one last run.

My plan is, if I get it set up with the BMC, that can be my Summer set up (more air flow) and when it comes to Winter, the Weather will lean my carbs off. Cold air and fluids are denser, therefore the particles are packed closer together = more air leaning things off :thumbup: So If I just chuck a standard filter in (less airflow) this should counter balance it and richen it back up. Hopefully....if i'm lucky, it wont require any major changes and will run good without having to mess around with the carbs again. So basically I can just hot swap the filters over for either Summer running or Winter running. I shall have to see how it goes :roll:

O' and this is with two standard long stacks. I originally wanted to get it set up with my Dr Honda copies, but they are out of action right now :thumbdown:

I'm waffling now, my pain killers have kicked in, a grin has crept onto my face. :lol: :lol: :lol:

(:-})
==============================Enter the Darkside
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Dyno Day 22nd June 2013.

Post by lloydie »

My standard filter has the caps removed but I have the k&n caps but I don't know if that will work !
But your welcome to try amcq
Oh and I too will be taking some tools and my vac gauges and tps tester and a spare set of carbs :-)
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Dyno Day 22nd June 2013.

Post by Griff1977 »

Ill plan to get there early, 9.30-10ish and ill be poised with my quorn sausages!!

I've got a BMC street filter in so ill do a baseline run with that and the baffles out to compare to a run with baffles in (I have a feeling it makes a difference so I want to prove or otherwise!) then ill throw the K&N in to compare / contrast. No major tweaks (unless the A/F can do with it) but will be interesting. First dyno run since i widened the main air jets as well. That's suppose to boost top end. Feels strong on the road but sometimes Dyno doesn't always agree!

Sounds antisocial but can't stay too long as ill be getting back to Liverpool for a family get together (wont see the missus & kids for another 2 weeks due to work commitments so she wants me back! Grrrrr).

Laters. Griff.
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Gazfirestormowner
Posts: 479
Joined: Wed Apr 10, 2013 10:11 am
Location: Rugby warickshire

Re: Dyno Day 22nd June 2013.

Post by Gazfirestormowner »

Well I'm hopefully getting there just behind virt as I'm following him over fingers crossed I think it should be about half 9 ish.
User avatar
AMCQ46
Posts: 16735
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Dyno Day 22nd June 2013.

Post by AMCQ46 »

ok, sounds likle I had better get there at 9.30 with the money, dont want you thinking the tight scots git has done a runner with your cash:D
AMcQ
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Dyno Day 22nd June 2013.

Post by lloydie »

I don't think much will happen till 10ish lol
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Dyno Day 22nd June 2013.

Post by Griff1977 »

lloydie wrote:I don't think much will happen till 10ish lol
Gotta get those quorn products cooked!!
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: Dyno Day 22nd June 2013.

Post by Virt »

Can I possibly transfer the deposit for my Dad onto someone else?
Slowly approaching the more bikes than birthdays achievement
Post Reply