VFR Bars

yellowstorm · Post by **yellowstorm** » Sun Sep 07, 2008 2:53 pm

I have noted that VFR bars can bolt straight on to a storm with a minor fairing mod.

Will I need extended brake & clutch lines or replacement throttle cables?

Does it matter which year of VFR the bars are off as they all seem to have 41mm dia forks?

Many thanks

pariah · Post by **pariah** » Sun Sep 07, 2008 7:42 pm

Hello yellow.

I fitted the vfr bars. Pre Vtec model. All I had to do was make up a small elongated z shaped bracket to allow the extra travel for the twin brake line mounting block thats all.

yellowstorm · Post by **yellowstorm** » Mon Sep 08, 2008 10:54 am

Thank you for that, there are a pair for Â£14 on flebay, may just buy them and give them a go.

yellowstorm · Post by **yellowstorm** » Thu Sep 11, 2008 11:01 pm

Just bought some VFR bars for a tenner. Any chance of I pic of the bracket I need to fabricate for the brake line block?

solorider · Post by **solorider** » Fri Sep 19, 2008 9:35 pm

yellowstorm wrote:Just bought some VFR bars for a tenner. Any chance of I pic of the bracket I need to fabricate for the brake line block?

i was lucky in that i had braided hoses and these were long enough,the clutch pipe i made a small bracket and bolted the pipe back bolting the bracket to the original ,it holds the pipe a bit higher and does not stretch the hose

pariah · Post by **pariah** » Sun Sep 21, 2008 7:37 am

14 squid, snap them up mate. mine was 49 squid including delivery. Will try and get a good pic and sizes for you monday .

Rick

JAVAHOUSE · Post by **JAVAHOUSE** » Tue Dec 30, 2008 5:54 pm

Hey, yellow storm... how did you go on with the VFR bar conversion?
and can you tell me how much higher the bars are?

Cheers

Rob