exhaust stickers

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
User avatar
firestarter1977
Posts: 197
Joined: Sat Nov 15, 2008 6:35 pm
Location: sheffield

exhaust stickers

Post by firestarter1977 »

hi all


right ive had my exhausts polished and the remus bagdes had to come off. thing is the sticky tape aint sticky anymore and just 2 rivets wont be enough.


what tape could i use that wont melt :( am starting to wonder if i did the right thing :(



regards mark
Image

the thunder rolls on!!!
Top
User avatar
Kitch
Posts: 1548
Joined: Fri Apr 28, 2006 7:05 pm
Location: Lancashire

Post by Kitch »

There's a whole host of high temperature glues you could use.

Most commonly "Oven Door Glue" would probably work.

A specialist solvent supplier will stock them and you can ask them before hand if it will be OK on metals etc.


Example: Superglue CA014 from http://www.glue-shop.com/ handles -85 to 188 deg C and is 8 quid for a little tube.
Voted most likely to be found dead in park bushes following an act of autoerotic asphyxiation.
Top
User avatar
firestarter1977
Posts: 197
Joined: Sat Nov 15, 2008 6:35 pm
Location: sheffield

Post by firestarter1977 »

thanks matey !

Regards mark
Image

the thunder rolls on!!!
Top
Post Reply

Return to “Workshop”