does anyone know what make this belly pan/fairing is?

[vtrmann]

just wondered if anyone knew where this belly pan was from for spec list i'm putting together?

http://s850.photobucket.com/albums/ab70 ... g&newest=1

http://s850.photobucket.com/albums/ab70 ... g&newest=1

[marlbororman]

dunno but can be bought here http://cgi.ebay.co.uk/HONDA-VTR1000-BLA ... 7089158451

[MJONESY]

i dunno eithe r but its the same as mine

[vtrmann]

thanks for the response.

[vtrbarmy]

Looks like it may be a Skidmarx pan, very similar to mine

[simo]

Hi M8,I recently bought a vtr with one of those on and it had a LEO VINCE stickers on it. Everything else on the bike was standard.

[tony.mon]

I don't care what his starsign is, he'd better not put his sticker on my bike......

[marlbororman]

lol, well i ordered some anyway, so will see when the turn up. anyway gotta be better than no lowers

[marlbororman]

hmmm still waiting, and no contact from the seller either, even after messaging him several times hes got the money too.


Im really hoping they turn up soon, as need them to get sprayed for my repsol paint job, and the lowrs will finish it off completely :)

[marlbororman]

wahooo just found this msg waiting for me


Hi Ian, thank you for your email. The lowers are being made at present, they should be with me by Wednesday next week and as soon as received they will be despatched by Parcelforce the same day. I will of course advise of tracking details. With best regards, Ray, Motorcycle Madness Ltd

- motorcyclemadnessltd

wed, been this wed going on the date of msg :):)


happy again :):)

[cliveyandrews]

They look the same as mine...



(needed a graphic to break them up a bit....)

[marlbororman]

Mine turned up today, extremely happy with the quality for the money, and the fixing kit is outstanding. maybe the best after market kit ive seen. will post some pics tomorrow or thursday before i fit em.

And they came pre painted in black, which tbh could of gone straight on the bike, but getting em painted to match the respray job,and stickered up, then laquered too. Well worth the money, And the wait (they are made to order)

[BarryH]

Those lowers are made by Skidmarx. When you've fitted them make sure that the edges of the upper left hand side are not rubbing on the clutch cover. They wear a lovely grove into the alloy. I had to trim mine down with a dremmel. There should be rubber washers.spacers in the fitting kit. They're a bugger to keep in place. I ended up sticking mine onto the lowers.

[marlbororman]

Well ive got all the brackets in place now ready for tonight when i pick the lowers back up

Cheers for the heads up, will keep a close eye out for rubbing. Yer got loads of rubber grommets and bolts , etc., Cant wait for tonight