Hi
How the f... can i adjust the mixture screw on the carbs, impossible to get in there. tryed a million times now. getting fustrated :-(
I bought one of the cheap tools on ebay, but it cant go in there either.
So how do you guyes do it ?
Jens.
Carb tools. mixture screw
-
Phil-VTwin
- Posts: 348
- Joined: Mon May 11, 2009 11:21 am
- Location: Olney, Bucks
Re: Carb tools. mixture screw
Ride Safe
Phil
Phil
Re: Carb tools. mixture screw
Already tryed that model. it dont fit in there 
-
benny hedges
- Posts: 6110
- Joined: Sun Oct 18, 2009 5:09 pm
- Location: Warrington
Re: Carb tools. mixture screw
is yours a later one with the d shaped mixture screw???
i have one i dont need - takes a bit of meddling but you can get at it if you persist lol
i have one i dont need - takes a bit of meddling but you can get at it if you persist lol
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
-
Phil-VTwin
- Posts: 348
- Joined: Mon May 11, 2009 11:21 am
- Location: Olney, Bucks
Re: Carb tools. mixture screw
Benny,
He has a '97 Storm so that tool IS the correct one as its a direct copy of the Honda tool.
Jens,
One thing to check is that the carb rubber band screws are not in the way and does your bike have the PAIR system fitted?
He has a '97 Storm so that tool IS the correct one as its a direct copy of the Honda tool.
Jens,
One thing to check is that the carb rubber band screws are not in the way and does your bike have the PAIR system fitted?
Ride Safe
Phil
Phil