sp1 tourer! ;-)
sp1 tourer! ;-)
after my trip to scotland on the SP the only draw back was my soft luggage flapping about! and although it was bungie strapped down and loads of anti slip matting under the side bags i still put a couple of small scuff's on the tail plastics!
so after lots of head scratching and a 48l universal box purchase off fleabay (£29) i've ended up with this, its ugly yes! but serves the purpose, 48l box and space on the rack for tent, sleeping bag ect, rack sits 2" higher so i can access the underseat area for plugging in sat nav, phone charger ect, best of all 4 bolts and the whole thing is off when i get to where im going roll on next road trip!
total cost inc top box £50 who says you cant tour on an SP
so after lots of head scratching and a 48l universal box purchase off fleabay (£29) i've ended up with this, its ugly yes! but serves the purpose, 48l box and space on the rack for tent, sleeping bag ect, rack sits 2" higher so i can access the underseat area for plugging in sat nav, phone charger ect, best of all 4 bolts and the whole thing is off when i get to where im going roll on next road trip!
total cost inc top box £50 who says you cant tour on an SP
4 wheels move the body, 2 wheels move the soul...........
- cliveyandrews
- Posts: 1041
- Joined: Tue Jul 07, 2009 9:01 pm
- Location: Tamworth, Staffordshire
- Contact:
Re: sp1 tourer! ;-)
Very clever!
However, if I was rich (and well) enough to have an SP, I think I would have to tour with no plastics barring a VISA!
However, if I was rich (and well) enough to have an SP, I think I would have to tour with no plastics barring a VISA!
=====================================================
Audi, Vide, Tace
aurantiacus tempestas es ocius
=====================================================
Audi, Vide, Tace
aurantiacus tempestas es ocius
=====================================================
Re: sp1 tourer! ;-)
Just post stuff to yourself at your destination.
TBH it's a bit too much faffing about if you're only going to the chippy, as your pie's cold by the time the postman calls, but at least it still keeps the aerodynamics clean.
TBH it's a bit too much faffing about if you're only going to the chippy, as your pie's cold by the time the postman calls, but at least it still keeps the aerodynamics clean.
It's not falling off, it's an upgrade opportunity.
Re: sp1 tourer! ;-)
if your gonna put stuff like luggage on the back of a sportsbike its a good idea to cover the plastics with masking tape or insulation tape, big thick stuff, this will look shite but when you get back peel it off and the plastics will be good as new
ps did you have meccano as a child??
ps did you have meccano as a child??
Re: sp1 tourer! ;-)
yes john, drilled through each side, 12mm threaded bar right through, couple of locking nuts on the inside (cant see em in the pics, then bolted the support bars to the outside, its very solid! the heaviest thing i could find was 20kg of spuds in the kitchen chucked em in the box and had a 10 mile ride round the back lanes near me! aint moved a mil so far when its all off ive got 2 black plugs that go in the hole's so you'd never know they we're there, need to do a longer run yet to see if it needs more support, but so far so goodJbrebel wrote:Do those rear brackets just mount into the plate/plastics Marra?
cheers tim i'll have a look for pete's thread
taffr, i loved meccano as a kid! still have the scar's to prove it
4 wheels move the body, 2 wheels move the soul...........
- Pete.L
- Forum Health And Safety Officer
- Posts: 7234
- Joined: Fri Sep 26, 2003 5:09 pm
- Location: Bristol
Re: sp1 tourer! ;-)
Hay that's neat!
Beats my block of wood any day Cost twice as much and doesn't come off with the ignition key though
The cut slots keep the bags from moving and the angled profile make sure the bags also stay in line with the plastics. Notice the huge cut out at the fron so I can still fit my a$$ in the seat
Pete.l
Beats my block of wood any day Cost twice as much and doesn't come off with the ignition key though
The cut slots keep the bags from moving and the angled profile make sure the bags also stay in line with the plastics. Notice the huge cut out at the fron so I can still fit my a$$ in the seat
Pete.l
My new ride is a bit of a Howler and I love to make her Squeal
Re: sp1 tourer! ;-)
Uffff....I don't think I would feel too comfortable with that TBH. I would bet that the plastic will allow the holes to elongate, or the plastic will fail. Plus the flat strips will have no sideways strength, allowing the whole shooting match to wobble side-to-side. Pretty disastrous if it all falls onto the back wheel.marravtr wrote:yes john, drilled through each side, 12mm threaded bar right through, couple of locking nuts on the inside (cant see em in the pics, then bolted the support bars to the outside, its very solid! the heaviest thing i could find was 20kg of spuds in the kitchen chucked em in the box and had a 10 mile ride round the back lanes near me! aint moved a mil so far when its all off ive got 2 black plugs that go in the hole's so you'd never know they we're there, need to do a longer run yet to see if it needs more support, but so far so goodJbrebel wrote:Do those rear brackets just mount into the plate/plastics Marra?
Would it not be possible to fabricate some bars to pick up on the pillion pegs?
I used some Offord throwovers and an Oxford tailpack on my recent jolly to Scotland. Solid as a rock, no scratches anywhere. Plus the butt of the Fireblade doesn't lend itself well to throwovers as it is fairly wide and tapers a lot (damn underseat zorst). It's all down to how you fix 'em to the bike.
Entia non sunt multiplicanda praeter necessitatem
Re: sp1 tourer! ;-)
That's why I asked Steve.
Got to agree-don't think I'd trust the undertray/plate mount to hold that kind of weight. Not without a better bracing system in place. You'd probably be better copying this sports rack system Marra.
http://www.ventura-bike.co.uk/products/ ... ystem.aspx
I had similar problems with my Buell-one dead sleeping bag, visor, visor bag and roll mat later I've learnt my lesson doh!
Got to agree-don't think I'd trust the undertray/plate mount to hold that kind of weight. Not without a better bracing system in place. You'd probably be better copying this sports rack system Marra.
http://www.ventura-bike.co.uk/products/ ... ystem.aspx
I had similar problems with my Buell-one dead sleeping bag, visor, visor bag and roll mat later I've learnt my lesson doh!
SP1's rock!
Re: sp1 tourer! ;-)
I have heard of those Ventura systems breaking....and when you see the design its not surprising.Jbrebel wrote:That's why I asked Steve.
Got to agree-don't think I'd trust the undertray/plate mount to hold that kind of weight. Not without a better bracing system in place. You'd probably be better copying this sports rack system Marra.
http://www.ventura-bike.co.uk/products/ ... ystem.aspx
I had similar problems with my Buell-one dead sleeping bag, visor, visor bag and roll mat later I've learnt my lesson doh!
@MarraVTR: I have an old Renntec grab-handle that has had a bit chopped out of it. You are welcome to it to cannibalise. It picks up on the seat cowl bolts (as you have done) and has slots which fit into the rails under the seat pad. You could easily weld the tray on top and bolt the top-box to it. It'd be a lot more solid than something bolted to a flappy bit of plastic.
Entia non sunt multiplicanda praeter necessitatem
Re: sp1 tourer! ;-)
you have pm mateyZakalwe wrote:I have heard of those Ventura systems breaking....and when you see the design its not surprising.Jbrebel wrote:That's why I asked Steve.
Got to agree-don't think I'd trust the undertray/plate mount to hold that kind of weight. Not without a better bracing system in place. You'd probably be better copying this sports rack system Marra.
http://www.ventura-bike.co.uk/products/ ... ystem.aspx
I had similar problems with my Buell-one dead sleeping bag, visor, visor bag and roll mat later I've learnt my lesson doh!
@MarraVTR: I have an old Renntec grab-handle that has had a bit chopped out of it. You are welcome to it to cannibalise. It picks up on the seat cowl bolts (as you have done) and has slots which fit into the rails under the seat pad. You could easily weld the tray on top and bolt the top-box to it. It'd be a lot more solid than something bolted to a flappy bit of plastic.
4 wheels move the body, 2 wheels move the soul...........
Re: sp1 tourer! ;-)
I can imagine they probably do depending on how you load them. It'd need better engineering should someone make one.Zakalwe wrote:I have heard of those Ventura systems breaking....and when you see the design its not surprising.
Lets us know how you get on Marra anythings got to be better than paying a bomb for a bit of welded metal like that Ventura system
SP1's rock!
Re: sp1 tourer! ;-)
will do john, got a rack off zakalwe on the way so gonna splice everything together solid! once done if you wanna borrow it just giz a shoutJbrebel wrote:I can imagine they probably do depending on how you load them. It'd need better engineering should someone make one.Zakalwe wrote:I have heard of those Ventura systems breaking....and when you see the design its not surprising.
Lets us know how you get on Marra anythings got to be better than paying a bomb for a bit of welded metal like that Ventura system
4 wheels move the body, 2 wheels move the soul...........