Raask raiser

bluesman · Post by **bluesman** » Sun Jul 25, 2004 10:37 pm

Saw Raask conversion kits at Busters site - says that it converts from clipons to conventional bar at only 35 pounds...A bit scary - has anybody tried them? I mean - will you still be able to hang off bike with conventional tube handlebar?

tony.wilde1 · Post by **tony.wilde1** » Mon Jul 26, 2004 6:57 am

all i got on mine is genmar risers mate.i tried this route too..but..these raisers will make the straight bars foul the preload adjusters when you try and fit them..ok?there is a previous post on here some where about it all.

basically the wont work

but genmars do work!

bluesman · Post by **bluesman** » Mon Jul 26, 2004 8:39 am

Thanks! That's what I suspected ...

May I ask - do you have any photos of your bike with Genmars? Are they like ring that go underneath clipons? If so - you supposed to drop forks to install it or..? And - if you drop forks bike leans forward more so you still have same overall position or...?
Sorry, I am just stuck - don't really know how it works?

tony.wilde1 · Post by **tony.wilde1** » Mon Jul 26, 2004 10:41 am

http://www.zianet.com/GenMar/

this is their site mate..they do make a difference ok?not perfect but they do make the bike more comfortable!its just really a spacer that drops on the forks..but its piss easy to fit!cheers

Post by **kevg** » Mon Jul 26, 2004 12:18 pm

i see they do the mirror extensions too, moves them out 1",

i think everyone requires that extra inch

$65 , not looked at postage, but shouldn't be to much for a couple of bits of plastic and some bolts, i'd hope.

Fireman on a Storm · Post by **Fireman on a Storm** » Mon Jul 26, 2004 12:33 pm

If you buy using paypal it includes delivery. It's about $8 extra about Â£4.50.

bluesman · Post by **bluesman** » Mon Jul 26, 2004 12:34 pm

Thanks folks! I will need to think hard now

about mirrors -I had a look at extenders..
Well, first of all - on my favorite online catalogue and shop http://www.louis.de mirrors for R1 cost 25 Euro for pair, but - as I like original storm mirrors shape I decided to pop into hardware shop and buy pices of plastic and have a go with drill and cutters

it is not really worth 65 bucks IMHO

If I will succeed I will upload escises and sizes so that people can do it themselves....

Post by **kevg** » Mon Jul 26, 2004 1:10 pm

i'd have to agree with you bluesman about the price, i'm sure i saw another thread else where about some one using flip flops as spacers, i think it might have been on here, that will be the flip flop stuff resurrected again

VTR1000.ORG

Raask raiser

Raask raiser

raisers

Thanks - any photos?

mirror extenders