no tabs

[uptonpark64]

any advice on my rear fairing round the seat, there should be 2 tabs underneath but iv'e got one broke
and one missing, firstly are they important and secondly, any way to fix it without 1.superglue or 2. plastic ties

[tony.mon]

The underneath ones don't seem to matter, but the ones on top are quite important.

It's often where a well-meaning mate has helped to bump-start the bike, and pushes on that plastic-
it's far too delicate to take that kind of force, much like myself.

Slap some gaffer tape round it, you can't see it from where you sit so it doesn't matter.

[SWAGGER]

If the tab has broken on the body panel you could build a very professional repair using 'Plastech' products. It's not actually a structural fixing point so as was said you could dog it.

[Wicky]

Like Tony said, woudn't worry about it and the fiddly little plastic screws that go with em - that includes the ones that are used on the inside of the fairing near the radiators.

[bigrich]

one of mine snapped off so i drilled a very small hole in the plastics and undertray and cable tie it, barely noticaeable

[uptonpark64]

thanks lads, one less thing to worry about!

[SWAGGER]

Seriously, if you have any kind of ability re airfix modelling give the Plastech and ABS plastic sheeting a go. You can achieve brilliant results.