RC-51 Parts
-
penst8grad
- Posts: 26
- Joined: Tue Jun 08, 2004 5:04 pm
- Location: Northeast USA
RC-51 Parts
How much will fit from an RC-51? I see many more parts for them on Ebay than VTR parts. Especially exhaust. It's time to make some noise
-
4bangthis996
- Posts: 38
- Joined: Mon Nov 24, 2003 6:07 am
- Location: Orlando, Florida. the shity states
uh..... basically none
no seriousl almost nothing it interchangable. Exhaust no because of the swing arm and such.
engine crap no the rc has no cam chain it uses gears.
the front forks and triple clamp might fit.
fairings no
it sucks, i know all this because i was exactly where you are rightnow like 1 1/2 years ago.
sorry.
no seriousl almost nothing it interchangable. Exhaust no because of the swing arm and such.
engine crap no the rc has no cam chain it uses gears.
the front forks and triple clamp might fit.
fairings no
it sucks, i know all this because i was exactly where you are rightnow like 1 1/2 years ago.
sorry.
Adeptus Mechanicus
RC 51 parts
Anyboby know if the brake calipers from the RC51 will fit the Hawk? I have the whole brake setup and am looking to upgrade the Hawk's. I was just going to use the M/C and the SpeiglerS/S lines I purchased. If the calipers can be used I will change them all over.
Rick D.
RC 51
Well I answered my own question today. The master cylinder went on with no problems. The calipers will not fit only because they are not shaped to clear the mounting tab on the fork leg. I will keep them in case I decide to go with USD forks down the road. The Speigler lines and RC51 M/C make a huge difference. Now I have 2 finger braking and no sponginess.
Rick D.