ROAS manual cct's

[alec]

Hi
My manual cct's arrived today from Rider on a Storm, one quick question when i take the old auto ones off do i still need to retain the cap things for the new ones or does Tray design them so these are not required now, cheers alec

[bigrich]

i just got mine too and I am slowly having a go at it....on number 7 of the instructions i cant seem to find RT! I can find an FT but not an RT, there is one other mark during the rotation but no letters....would this be it?

[alec]

i just got mine too and I am slowly having a go at it....on number 7 of the instructions i cant seem to find RT! I can find an FT but not an RT, there is one other mark during the rotation but no letters....would this be it?

hello Bigrich,
i took my covers off to have a look and there's an RT and Ft on mine, i watched the lobes on the cams and when they were facing each other you should be able to see the RT on in the hole. might be better waiting for one of the experienced mechanics to help though

[bigrich]

had another go alec and found it! i am going to stop where i am now and wait for my mate who is a mechanic to come over and give me a hand for the rest of it!

[Rider on a Storm]

had another go alec and found it! i am going to stop where i am now and wait for my mate who is a mechanic to come over and give me a hand for the rest of it!

well rich have u got it sorted?

[benny hedges]

you dont need the bumper thing off the end.
just the same as ape tensioners, with tray's cct's, the round end goes up against the plastic chain guide.
it doesnt actually touch the chain itself.

regarding the RT mark..... if you are knelt facing the right hand side of the bike, the RT mark will be an the far left, partially obscured by the back of the frame which is probably why you cant see it.

would help if someone could take a picture of where the mark is, in relation to tdc on the rear pot.

[Rider on a Storm]

you dont need the bumper thing off the end.
just the same as ape tensioners, with tray's cct's, the round end goes up against the plastic chain guide.
it doesnt actually touch the chain itself.

regarding the RT mark..... if you are knelt facing the right hand side of the bike, the RT mark will be an the far left, partially obscured by the back of the frame which is probably why you cant see it.

would help if someone could take a picture of where the mark is, in relation to tdc on the rear pot.

workshop day with pics

[bigrich]

Tray, yeah got it sorted by myself, took my time and it was all pretty simple in the end - dont think i can hear a rattle or a whine anyway!

seen your post about the rr, i got one off ebay for a 2006 cb125 and it was straight swop over plug in and play, its finned so shouldnt overheat and its running at 13.5v on idle.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 500wt_1156

[alec]

you dont need the bumper thing off the end.
just the same as ape tensioners, with tray's cct's, the round end goes up against the plastic chain guide.
it doesnt actually touch the chain itself.

regarding the RT mark..... if you are knelt facing the right hand side of the bike, the RT mark will be an the far left, partially obscured by the back of the frame which is probably why you cant see it.

would help if someone could take a picture of where the mark is, in relation to tdc on the rear pot.

think lloydie did some i'll have a look,

[alec]

you dont need the bumper thing off the end.
just the same as ape tensioners, with tray's cct's, the round end goes up against the plastic chain guide.
it doesnt actually touch the chain itself.

regarding the RT mark..... if you are knelt facing the right hand side of the bike, the RT mark will be an the far left, partially obscured by the back of the frame which is probably why you cant see it.

would help if someone could take a picture of where the mark is, in relation to tdc on the rear pot.

here it is benny http://www.vtr1000.org/phpBB3/viewtopic ... br#p151444 on page 3

[Rider on a Storm]

Tray, yeah got it sorted by myself, took my time and it was all pretty simple in the end - dont think i can hear a rattle or a whine anyway!

seen your post about the rr, i got one off ebay for a 2006 cb125 and it was straight swop over plug in and play, its finned so shouldnt overheat and its running at 13.5v on idle.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 500wt_1156

Hi rich, got my rr today, same as the one you used, got it for 20 euro from e-bay, thanks for the tip m8

[bigrich]

good lad!