Midlands Workshop day

[Eclectic]

This must be the Solihull Workshop day?

Id like to bring my 'storm along for the clean out of her pipes. Providing its OK, what would I need to bring along, where am I going, and is anyone else heading from this kind of way I can meet up with?

[tony.mon]

There's two "workshop day" threads, one in Kent (which you've just missed) and the one here, so why not have a look at those and you'll find out all about it.
Tools/
You'll need a small socket set, some screwdrivers, and if you're stripping carbs a handful of long cable ties (I'll show you why on the day )

[sirch345]

All the very best for the workshop day guys, good on any of you willing to give up your spare time and knowledge

Chris.

[Eclectic]

There's two "workshop day" threads, one in Kent (which you've just missed) and the one here, so why not have a look at those and you'll find out all about it.
Tools/
You'll need a small socket set, some screwdrivers, and if you're stripping carbs a handful of long cable ties (I'll show you why on the day )

I think I can manage that

If AMCQ46 doesnt mind me tagging along, then Id very much like to meet up and get some expert guidance!

[rob's red storm]

Afternoon all!
Just got back into the country, seems I have brought the weather with me! I won't be doing work to the bike for a bit so scratch brgs and clutch for me for the mo, but I'll be there for moral support and the ride afterwards!!
Cheers
Rob

[geodude]

Thanks for today Al. These workshop days are great. I learned a lot. Shame not many turned up. Maybe next time eh?

[geodude]

.













































Obviously j/k

[AMCQ46]

should have been a week earlier on 1st April

[AMCQ46]

There's two "workshop day" threads, one in Kent (which you've just missed) and the one here, so why not have a look at those and you'll find out all about it.
Tools/
You'll need a small socket set, some screwdrivers, and if you're stripping carbs a handful of long cable ties (I'll show you why on the day )

I think I can manage that

If AMCQ46 doesnt mind me tagging along, then Id very much like to meet up and get some expert guidance!

hi mate.........the more the merrier

will PM address

Just off M42 Jkt 4, headding towards Stratford

See you any time after 10

[Eclectic]

Thanks mate!

Is anyone else heading there from East anglia direction?

[AMCQ46]

Eclectic, What jobs do you hope to get done on the day? whill help us work out what you might need to bring with you

[Eclectic]

Idle jets mate.

Id also like to take a gander at some roas ccts going in so I can do mine when he has some ready.

Sent from my Desire HD using Tapatalk

[AMCQ46]

latest line up

Clive & Pauline - CCT's but not sure if they can make it
Rob - coming but only to watch
Geo - head bearings
Styler & a mate - dont know what Jobs
Waggy - cant make it he has to work..bit of a shame as he lives closest...will try and put stoppers in his CCT's another time as I dont want to find out that he bent the valves!
StormShun - valves, linkage, carbs lots of other bits
eclectic - carbs
AMcQ46 - spare engine needs stoppers fitted, valves checked .........but only if there is time between helping you lot

Tony.mon - technical experts and tea drinkers...........benny has to stay at home and polish his little machine

weather looks ok-ish, says scattered showers 3% chance of rain

[geodude]

Geo - Head bearing and roas ccts.

I am staying near Nuneaton on Friday night. See you Satdee

Do I need to bring anything. I'd rather not carry tools up from Pompey in a rucksack if I can help it.

[AMCQ46]

should be OK for most tools as there is not too many people, but if you can bring the small basics like a set of allen keys and a 1/4 drive socket set that might make life easier than sharing.

if I was being mean, I would ask you to bring a selection of hammers to get your bearings in with, but I guess you can use mine for a small fee