I have had a search, and a look in the Haynes manual, but can find the serial numbers for the wheel bearings [ie 6004 2RS C2, [size, seal type, internal clearance grade]].
Anybody got those numbers for the front & rear?
Wheel bearing part Numbers?
-
benny hedges
- Posts: 6110
- Joined: Sun Oct 18, 2009 5:09 pm
- Location: Warrington
Re: Wheel bearing part Numbers?
they will be a c2 bearing, not sure what the DDU means but they do have 2 rubber seals so the 2rs is right
the part for the front is 6004 2RS DDU 20x42x12 - 42od x20id x12mm wide
the part for the rear is 6204 2RS DDU 20x47x14 - 47 od x 20 id x 14mm wide
kyoto info - Kyoto Motorcycle Bearings
High strength AISI 52100 chrome steel in all inner rings, outer rings, and rolling elements, heat-treated to 60-65 HRC.
Manufactured to ABEC 1 dimensional tolerances.
Every Kyoto Bearing is electronically tested for noise and vibration according to ANSI/AFBMA Standard 13-1987.
Factory-packed with premium greases like CHEVRON SRI-2 and MOBIL POLYREX EM
Quality control system complies with the international standard ISO 9002, 2000 and its technical equivalent,
all the info is from wemoto , just click i next to the part
the part for the front is 6004 2RS DDU 20x42x12 - 42od x20id x12mm wide
the part for the rear is 6204 2RS DDU 20x47x14 - 47 od x 20 id x 14mm wide
kyoto info - Kyoto Motorcycle Bearings
High strength AISI 52100 chrome steel in all inner rings, outer rings, and rolling elements, heat-treated to 60-65 HRC.
Manufactured to ABEC 1 dimensional tolerances.
Every Kyoto Bearing is electronically tested for noise and vibration according to ANSI/AFBMA Standard 13-1987.
Factory-packed with premium greases like CHEVRON SRI-2 and MOBIL POLYREX EM
Quality control system complies with the international standard ISO 9002, 2000 and its technical equivalent,
all the info is from wemoto , just click i next to the part
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
Re: Wheel bearing part Numbers?
never thought to look there 
DDU is a designation for a full contact seal, thought it was the SKF naming, but I should be able to source some through my contacts. thanks
DDU is a designation for a full contact seal, thought it was the SKF naming, but I should be able to source some through my contacts. thanks
AMcQ
Re: Wheel bearing part Numbers?
A couple of folk on here have mentioned ceramic bearings. Are they available readily over here and are they better than stock?
What do you reckon chaps.
What do you reckon chaps.
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]