Where are these bolts from?

Miztaziggy · Post by **Miztaziggy** » Thu Aug 04, 2011 9:53 pm

I've had the bike in bits again, and now have these left over....they aren't from exhaust or suspension, so I'm stumped.

benny hedges · Post by **benny hedges** » Thu Aug 04, 2011 11:14 pm

what size are they??? m6 10mm spanner?

they are used all over the bike!
what did you take off?

the left one looks like something that bolts through the subframe....
the right one has locking compound on it so i dont think that nut came off it.

have a look around it for missing bolts... or maybe the parts you fitted already had those in so they arent needed.

Miztaziggy · Post by **Miztaziggy** » Fri Aug 05, 2011 8:37 am

Ahhh crap I just realised where these are from.

They are out of the front fairing bracket I replaced. Panic over :-)

tony.mon · Post by **tony.mon** » Fri Aug 05, 2011 11:30 am

Those look like front fairing bracket bolts, probably from the one you replaced.

Hope this helps.

Tony

Miztaziggy · Post by **Miztaziggy** » Fri Aug 05, 2011 1:29 pm

tony.mon wrote:Those look like front fairing bracket bolts, probably from the one you replaced.

Hope this helps.

Tony

You may be right, ill go check

tony.mon · Post by **tony.mon** » Fri Aug 05, 2011 10:14 pm

Miztaziggy wrote:
tony.mon wrote:Those look like front fairing bracket bolts, probably from the one you replaced.

Hope this helps.

Tony
You may be right, ill go check

I thought about going green, with gold pinstripes.

VTR1000.ORG