Tips for a new player?
Tips for a new player?
Hi Folks,
Great forum you guys seem to have going here. I hope you don't mind having a Kiwi who lives in Australia mixing it with you all!?
I've put the deposit down on a brand spankers 2003 Firestorm (in matt black) and will be picking it up on Friday avo'.
Anybody have some really good tips as to what I could have done at the 1000K serice as far as performance parts go i.e. pipes, cans, carby kits, filters, braided lines, pads and chain?
Anything else you can think of, please let me know
Great forum you guys seem to have going here. I hope you don't mind having a Kiwi who lives in Australia mixing it with you all!?
I've put the deposit down on a brand spankers 2003 Firestorm (in matt black) and will be picking it up on Friday avo'.
Anybody have some really good tips as to what I could have done at the 1000K serice as far as performance parts go i.e. pipes, cans, carby kits, filters, braided lines, pads and chain?
Anything else you can think of, please let me know
Cheers
Marknz
1977 CB150T Bucket Racer
2004 VTR1000 Firestorm
Marknz
1977 CB150T Bucket Racer
2004 VTR1000 Firestorm
- essexbloke
- Posts: 656
- Joined: Wed Nov 13, 2002 12:29 pm
- Location: Colchester, England
- firestorm_al
- Site Admin
- Posts: 756
- Joined: Mon May 20, 2002 9:56 am
- Location: Aberdeen (Scotland - UK)
- Contact:
Bucket racing essentially relates to 'Buckets of Shite' We race old Jap commuter bikes with 2 strokers limited to 100cc and 4 strokers limited to 150cc. Bl#$dy great, cheap fun and the fastest bike in a strait line has just topped 100mph this season and is a CB150T dynoed at 28hp! And it's not mine!
Have a look at some of these pic's here if you like...
http://www.users.bigpond.com/dmstrong/roguesgallery/
mine is #67
Have a look at some of these pic's here if you like...
http://www.users.bigpond.com/dmstrong/roguesgallery/
mine is #67
Cheers
Marknz
1977 CB150T Bucket Racer
2004 VTR1000 Firestorm
Marknz
1977 CB150T Bucket Racer
2004 VTR1000 Firestorm
- essexbloke
- Posts: 656
- Joined: Wed Nov 13, 2002 12:29 pm
- Location: Colchester, England
- firestorm_al
- Site Admin
- Posts: 756
- Joined: Mon May 20, 2002 9:56 am
- Location: Aberdeen (Scotland - UK)
- Contact:
Not sure who my hoses are made by but make sure you get a 2 line kit for the front and get them with stainless steel connectors. I think they are have a plastic coating over the braid these days. I went for the clear coat but you can pay extra for colours.
I've probably not given you any more information than you already know but there you go!
I've probably not given you any more information than you already know but there you go!
After three days with the new steed and 917km on the clock I thought it'd be a great time to let you know my initial thoughts.
Well after moving up from a VTR250 of course the first impression was the physical size and the enormous amount of power this beast can deliver if you want it to. I'm restricted within the first 1000km to stay below 5000rpm, but as you all know there is plenty of mumbo available even at that level. All I have to do now is get more work on that clutch hand... coming from a cable operated clutch on the VTR250 it really is quite a strain at the end of a 300km ride. Very sure footed on the road and so so easy to ride in almost any gear, but of course even the standard pipes sound better with some good rev's up don't they!
Oh well, first service is booked in for this Thursday, so it'll be time to open it up 'a little bit'
So what am I going to do with it now?
Here's what:
Leo Vinci SBK pipes (Alloy)
Carby Kit
K&N Air Filter
Goodridge Braided brake lines front & rear in yellow with stainless steel connectors (thanks firestorm_al)
MRA double-bubble full tint screen
CF Hugger
I'll be sure to get some before and after pic's up on the net at some stage for you all to have a perve.
Cheers
Well after moving up from a VTR250 of course the first impression was the physical size and the enormous amount of power this beast can deliver if you want it to. I'm restricted within the first 1000km to stay below 5000rpm, but as you all know there is plenty of mumbo available even at that level. All I have to do now is get more work on that clutch hand... coming from a cable operated clutch on the VTR250 it really is quite a strain at the end of a 300km ride. Very sure footed on the road and so so easy to ride in almost any gear, but of course even the standard pipes sound better with some good rev's up don't they!
Oh well, first service is booked in for this Thursday, so it'll be time to open it up 'a little bit'

So what am I going to do with it now?
Here's what:
Leo Vinci SBK pipes (Alloy)
Carby Kit
K&N Air Filter
Goodridge Braided brake lines front & rear in yellow with stainless steel connectors (thanks firestorm_al)
MRA double-bubble full tint screen
CF Hugger
I'll be sure to get some before and after pic's up on the net at some stage for you all to have a perve.
Cheers
Cheers
Marknz
1977 CB150T Bucket Racer
2004 VTR1000 Firestorm
Marknz
1977 CB150T Bucket Racer
2004 VTR1000 Firestorm
- essexbloke
- Posts: 656
- Joined: Wed Nov 13, 2002 12:29 pm
- Location: Colchester, England
- essexbloke
- Posts: 656
- Joined: Wed Nov 13, 2002 12:29 pm
- Location: Colchester, England
- firestorm_al
- Site Admin
- Posts: 756
- Joined: Mon May 20, 2002 9:56 am
- Location: Aberdeen (Scotland - UK)
- Contact:
Funny you should say that about the clutch. In normal open road type riding the clutch feels good with plenty of feel. In those situations though I tend to only pull the clutch in slightly which makes my gear changes a bit smoother which is appreciated by your passenger should you be carrying one. I've been on the bike on very long rides before ( puncuated by fuel stops of course
) and never found the clutch to be a problem so you'd better start gripping balls to strengthen your hand mate!
However, in town when there's traffic and I'm stopped I pull the clutch right in. After a wee while riding my and and wrist really ache. Probably a combination of and old injury and the hydraulic clutch.
Most of the miles I do at the moment are on the run to and from work so I guess I'll soon be able to see how the Bandit compares to the VTR as a commuting tool.
Al.


However, in town when there's traffic and I'm stopped I pull the clutch right in. After a wee while riding my and and wrist really ache. Probably a combination of and old injury and the hydraulic clutch.

Most of the miles I do at the moment are on the run to and from work so I guess I'll soon be able to see how the Bandit compares to the VTR as a commuting tool.

Al.
- essexbloke
- Posts: 656
- Joined: Wed Nov 13, 2002 12:29 pm
- Location: Colchester, England