Well...im definitely on now
Just this second finished putting it back together...didnt think I would get done in time earlier on.
Got home at 5 with both wheels in the car, plus the tank, back fairing, under tray and new brake discs.
Swapped the brake discs on front wheel
Fitted front wheel
Fitted back wheel
Fitted tank
Went for a drive to find that the head bearing I replaced mid week was too loose
So dropped the forks, lifted the yolk, tightened the bearing, put it back together, tested
Still too loose, repeat above and tightened again, tested and ok this time.
Jacked it up, put the yolk back on, pulled the forks down and tightened up the forks
Fitted lock to under tray, fitted number plate to under tray, indicators to that, then fitted the undertray
Fitted back fairing and seat
It was dark by this point, so I couldnt see very well with a garage light, but fitted front top fairing and somehow managed to connect up the lights and indicators without being able to see a thing!!
Fitted bottom fairing
And voila!! All done and ready to go after a very busy night
