can diamiter

seb421 · Post by **seb421** » Sat Dec 17, 2011 4:36 pm

Scorpion cans,

i have high-mount pipes on mine a the moment, does any one know what the diameter of a scorpion high mount link pipe is?

like the pipes being higher up but dont like the end cans, only got them as i got the whole lot off ebay cheep as the blue flames were buggered.

looking to posibly keep the pipes and use a different end cans

very much like the cans on Benny's tho, with the upwards / inwards sweep to them (looks rather factory spec) any one know how much they was or if there were specially made?

thumperslaw · Post by **thumperslaw** » Sat Dec 17, 2011 4:45 pm

Mine is 52mm on my ark pipes

tony.mon · Post by **tony.mon** » Sat Dec 17, 2011 4:51 pm

seb421 wrote:
very much like the cans on Benny's tho, with the upwards / inwards sweep to them (looks rather factory spec) any one know how much they was or if there were specially made?

I reckon he fell off, once on each side, and just left 'em like it....

seb421 · Post by **seb421** » Sat Dec 17, 2011 5:01 pm

tony.mon wrote:
seb421 wrote:
very much like the cans on Benny's tho, with the upwards / inwards sweep to them (looks rather factory spec) any one know how much they was or if there were specially made?
I reckon he fell off, once on each side, and just left 'em like it....

Tried that one mate and it didn't look much of a bobby dazzler

benny hedges · Post by **benny hedges** » Sat Dec 17, 2011 6:09 pm

seb421 wrote: very much like the cans on Benny's tho, with the upwards / inwards sweep to them (looks rather factory spec) any one know how much they was or if there were specially made?

theyre laser 'dual sound' cans m8... i got them from someone here (cant remember who sorry!) for 120 iirc.. absolute bargain.
they were to replace the new to me carbon vipers which i demolished when i binned it lol!

they were mint when i got them (and still are!) & no i didnt fall off and bend them like that... they're sposed to be like that i think!
they do look & sound very different & i like them a lot.
the link pipes flare out to about 70mm which i think helps make the deeper than usual tone.

one of my winter jobs is to repack them and clean them up proper as i intend to keep these ones on

they are now discontinued afaik, for the firestorm anyway.

seb421 · Post by **seb421** » Sat Dec 17, 2011 6:40 pm

benny hedges wrote:
seb421 wrote: very much like the cans on Benny's tho, with the upwards / inwards sweep to them (looks rather factory spec) any one know how much they was or if there were specially made?
theyre laser 'dual sound' cans m8... i got them from someone here (cant remember who sorry!) for 120 iirc.. absolute bargain.
they were to replace the new to me carbon vipers which i demolished when i binned it lol!

they were mint when i got them (and still are!) & no i didnt fall off and bend them like that... they're sposed to be like that i think!
they do look & sound very different & i like them a lot.
the link pipes flare out to about 70mm which i think helps make the deeper than usual tone.

one of my winter jobs is to repack them and clean them up proper as i intend to keep these ones on

they are now discontinued afaik, for the firestorm anyway.

Cheers mate, do you think a custom can builder like mtc and the like would be able to replicate the look of yours? and at how much at a guess?

benny hedges · Post by **benny hedges** » Sat Dec 17, 2011 7:08 pm

any good panel monkey can make anything tbh.... you should see the ones cheeky kev fabbed up for his sp2, they look bob on (apart from the blobby welds lol) - very similar to the linkys on mine tbh.

ive not seen any others like em.

mtc will make any can to suit but afaik they do not make their own link pipes.

just fyi, blue flame are back in business now.. some ex employees bought the company & the name and set up under the company name 'tube science' in skem.
was in there the other week fixing their compressors - they have now also pinched the design of my diy baffles!

seb421 · Post by **seb421** » Sat Dec 17, 2011 7:24 pm

benny hedges wrote:any good panel monkey can make anything tbh.... you should see the ones cheeky kev fabbed up for his sp2, they look bob on (apart from the blobby welds lol) - very similar to the linkys on mine tbh.

ive not seen any others like em.

mtc will make any can to suit but afaik they do not make their own link pipes.

just fyi, blue flame are back in business now.. some ex employees bought the company & the name and set up under the company name 'tube science' in skem.
was in there the other week fixing their compressors - they have now also pinched the design of my diy baffles!

wow didn't know they was out of business, i know the quality went off and they didn't offer that fancy better built EVO models for ages but wasn't aware they closed.

its the link pipes on yours i liked a lot, if i contacted some where that can make them would the need my bike or just be able to look at a picture of yours and fab them up?

i know bugger all about metal working etc, so sorry if i sound silly mate. most the tools we have here are 25 + years old that my Dad took from Edbros as a young man

id love to have money to kit out the garage and actually be able to knock out some bits

benny hedges · Post by **benny hedges** » Sat Dec 17, 2011 7:31 pm

seb421 wrote:
its the link pipes on yours i liked a lot, if i contacted some where that can make them would the need my bike or just be able to look at a picture of yours and fab them up?

they are off atm. if you can find someone to copy them.... obviously i need them back lol!

pm cheeky kev - maybe he could make you some?
i know he's got the spare time like cos he does fek all in work lol!!

seb421 · Post by **seb421** » Sat Dec 17, 2011 7:40 pm

benny hedges wrote:
seb421 wrote:
its the link pipes on yours i liked a lot, if i contacted some where that can make them would the need my bike or just be able to look at a picture of yours and fab them up?

they are off atm. if you can find someone to copy them.... obviously i need them back lol!

pm cheeky kev - maybe he could make you some?
i know he's got the spare time like cos he does fek all in work lol!!

HAHA i shall do that now mate, cheers

Flatline · Post by **Flatline** » Sat Dec 17, 2011 8:20 pm

Seb, is that COD is see?

seb421 · Post by **seb421** » Sat Dec 17, 2011 9:02 pm

Flatline wrote:Seb, is that COD is see?

Sacked that off after playing it for 10 min's mate, wasn't impressed felt like i was playing MW2 again. couldn't see what I had blown 40 quid on other than some rubbish maps.

Do like battlefield 3 tho, you got that?

thumperslaw · Post by **thumperslaw** » Sun Dec 18, 2011 1:38 am

seb421 wrote:
Flatline wrote:Seb, is that COD is see?
Sacked that off after playing it for 10 min's mate, wasn't impressed felt like i was playing MW2 again. couldn't see what I had blown 40 quid on other than some rubbish maps.

Do like battlefield 3 tho, you got that?

Ps3 or shitbox?

seb421 · Post by **seb421** » Sun Dec 18, 2011 1:47 am

thumperslaw wrote:
seb421 wrote:
Flatline wrote:Seb, is that COD is see?
Sacked that off after playing it for 10 min's mate, wasn't impressed felt like i was playing MW2 again. couldn't see what I had blown 40 quid on other than some rubbish maps.

Do like battlefield 3 tho, you got that?
Ps3 or shitbox?

Shitbox might have to pay a nominal amount for the privilege but least the service works when you want it too, + the benefit of a party chat with out all the yanks and kids, had a PS3 and got shut.

Flatline · Post by **Flatline** » Sun Dec 18, 2011 9:34 am

got bf3 on xbox yeh

SadFlatLine, or any of the Sad clan

VTR1000.ORG

can diamiter

can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter

Re: can diamiter