The powdercoat has gone into the front holes so the bolt doesn't fit
What's the best way to remove powdercoat from inside the hole?
Another Swingarm problem. Powdercoating
Re: Another Swingarm problem. Powdercoating
If it's threaded "Tap" it out,........If it's a plain hole "Drill" it out dear Lizer 
-
agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Another Swingarm problem. Powdercoating
Well I've managed to do it
Used one of those wire brushes on the end of a drill
One of those that stick out at the end, not the wheels that go round and round and round
Pheww, got a bit dizzy there
Used one of those wire brushes on the end of a drill
One of those that stick out at the end, not the wheels that go round and round and round
Pheww, got a bit dizzy there
-
benny hedges
- Posts: 6110
- Joined: Sun Oct 18, 2009 5:09 pm
- Location: Warrington
Re: Another Swingarm problem. Powdercoating
just a tip for anyone else doing it... put a bolt in any hole with a thread & use a length of studding with big washers & nuts through the spindle holes!! 
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.