Any one got a photo of

thumperslaw · Post by **thumperslaw** » Wed Feb 29, 2012 9:14 pm

The engine in the bike with no air box on it?

I need to see where the side covers (little black plastic things go)

Thanks

lloydie · Post by **lloydie** » Wed Feb 29, 2012 9:18 pm

Sorry the only ones I have

thumperslaw · Post by **thumperslaw** » Wed Feb 29, 2012 10:08 pm

Perfect.

First photo its got that black tray thing under carbs

Me needs that!

jono49 · Post by **jono49** » Wed Feb 29, 2012 11:33 pm

Dont know if this is any good it's a bit biased to the left hand side?

http://www.ixxra.co.uk/v-web/phpBB3/dow ... e21a0a6940

tony.mon · Post by **tony.mon** » Thu Mar 01, 2012 8:38 am

The two smaller pieces that attach to the tray are easy to fit; one has a 90degree bend to it and secures with a trim clip under the frame rail, the other secures with a trim clip to the triangular section (that's the LH one).

RH one goes round the throttle cables, the LH one just blocks the hole behind the front coil.

But interestingly if you fit stick coils, you can remove the front coil, and that piece of trim plastic, and that's route into the airbox area for ram air.

thumperslaw · Post by **thumperslaw** » Thu Mar 01, 2012 4:13 pm

I never fitted the black try back on my storm after i swapped engine over

Found that caused it to run like sh1t

VTR1000.ORG