First dibs on my standed rear light

Vtrkidda · Post by **Vtrkidda** » Sat Mar 03, 2012 4:19 pm

some one wanted first dibs on my standed rear light I cant remember what member it was

I now have a clear one coming so its yours

i think it was the guy whos avatar was of a chick sqeeeeeeeeezing into some black wet shorts

and i mean sqeeeeeeeeeeeeeeeeeeeeeeez

agentpineapple · Post by **agentpineapple** » Sat Mar 03, 2012 5:20 pm

that might be lloydie, it's a great avatar.....mmmm

lloydie · Post by **lloydie** » Sat Mar 03, 2012 5:44 pm

i had dibs on the standard indicators

lloydie · Post by **lloydie** » Sat Mar 03, 2012 5:46 pm

are you still looking at >>>>>>>>>>>>>>>>>>>>>>>>

Vtrkidda · Post by **Vtrkidda** » Sat Mar 03, 2012 6:04 pm

lloydiecbr wrote:i had dibs on the standard indicators

Ive cut the wires on the standed indicators

i needed extra because the others were to short you can have them for nowt pm me you details

Just a quick one ive changed the rears to smaller blinkers normal bulbs not LED they flash faster as if one is out any ideas

ive checked all wires they are fine will it be my relay ?
,as the right indicator Has alwys flashed faster than the left with the standed blinkers on

lloydie · Post by **lloydie** » Sat Mar 03, 2012 6:53 pm

Sounds like the relay to me

tony.mon · Post by **tony.mon** » Sat Mar 03, 2012 7:15 pm

Earth problem.
The load isn't enough to make the flasher unit function correctly.

Or you have made an error, and the new ones ARE in fact LEDS.
Just take the lens cover off one and have a look for a bulb with an element in it.

Vtrkidda · Post by **Vtrkidda** » Sun Mar 04, 2012 7:56 pm

Defo not led indicators ive checked today

what i have noticed is my switch is a bit dodgy to push you have to keep your thumb on it for a while

ive orderd a relay today ill try that then how do a test if its a dodgy earth my mate said that as well

chris vtr virgin · Post by **chris vtr virgin** » Sun Mar 04, 2012 8:17 pm

I think i may still have a set of four standard indicators if your still needing them will have a rumage tomorrow and let you know if thats any good for you.

chris vtr virgin · Post by **chris vtr virgin** » Thu Mar 08, 2012 6:44 am

lloydiecbr PM sent regarding indicators

VTR1000.ORG