MacV2 wrote:BROOK STREET MEETING POINT.
Mac.
BSM. with bike!!!
cybercarl.
storminghonda
Simon-I
Yeti-hopefully, possibly.
Workshop Day - Colchester Essex - April 7
Re: Workshop Day - Brook Street Sub Meet.
Making up since 2007, sometimes it's true...Honest...
- Styler4077
- Posts: 344
- Joined: Thu Aug 31, 2006 9:50 pm
- Location: Bedford
Re: Workshop Day - Colchester Essex - April 7
Marty, I'll bring the oil tray container and a couple of empty 4-5 ltr oil cans so you can do you oil change, I'll take the old oil away for Wicky.
Anyone got any spare sump plug washers just in case?
I'll chuck in as much tools, rags and other bits and bobs as I can.
What we doing for lunch? Is there a local shop for sandwich's etc etc?
Anyone got any spare sump plug washers just in case?
I'll chuck in as much tools, rags and other bits and bobs as I can.
What we doing for lunch? Is there a local shop for sandwich's etc etc?
"Only one life, so live it and ride a motorcycle"
Re: Workshop Day - Colchester Essex - April 7
YETI..
brook street
see ya there .
lunch is important .. but brekkie`s first ? what we doin ?
the old girl is up n running , a bit more multi coloured than i would
like her to be but im on the road .( trackday parts )
just about to give her a test ride , should be fine
see ya tomorrow
YETI..


lunch is important .. but brekkie`s first ? what we doin ?
the old girl is up n running , a bit more multi coloured than i would
like her to be but im on the road .( trackday parts )
just about to give her a test ride , should be fine

see ya tomorrow
YETI..

Re: Workshop Day - Colchester Essex - April 7
I would not call myself an electronics wizz, but I know a bit.Any electronics wizz's turning up? I have very bright red green and blue LED's in a single unit together with the correct resistors that we could try and make speed and rev counter back lights with.
I shall bring a good quality 12v test light, crimpers and an assortment of electrical terminals. And if I can find my multimeter (it's on the missing list) I shall bring that along too.
Tools: I'm planning on having a play with the carbs/mixture on my bike, so a small assortment of tools (to many tools weigh too much to carry on my back!) to do the job. I got one of those Carbtune (which i'm bringing as well) £60 jobbie screwdrivers kits. You know the long handle right angled ratcheting things. oh here you go, it's easier to show you!

Got my batteries on charge for stills camera, I'm also bringing that.
Breakfast: Double egg, bubble, beans, mushrooms, and 2 slices of buttered bread to mop up the plate, strong coffee and a fag. Then I wont need lunch. Mmmm
Should be a good day folks, weathers looking good.

(:-})
PS If anyone wants to shoot some video on camera/phone whatever. I shall bring my USB dongle along or hard drive (I'm sure wicky wont mind us using his computer to transfer footage). A bit of post production is what I got in mind! So if you give me the footage I will edit alongside with the pics, add some audio, compile something for the forum. If you are shooting some video, don't forget to bring the appropriate USB/firewire cable for transfer. The same goes for stills pics.

==============================Enter the Darkside
Re: Workshop Day - Colchester Essex - April 7
I wouldn't worry about the colour Yeti...you haven't seen BSM's bike yet!YETI wrote:YETI..brook street
see ya there .
lunch is important .. but brekkie`s first ? what we doin ?
the old girl is up n running , a bit more multi coloured than i would
like her to be but im on the road .( trackday parts )
just about to give her a test ride , should be fine![]()
see ya tomorrow
YETI..
For breakie if we can't get proper sustenance at Brook Street I'm sure we will find a suitable trough on the A12 before we turn off, Wicky has already pointed out a Greasy spoon at Marks Tey.
As for lunch there is bound to be a shop we can raid near his house although I think Wicky did mention something about a pack lunch being a good Idea.
See you in the morning.
Mac
Making up since 2007, sometimes it's true...Honest...
Re: Workshop Day - Colchester Essex - April 7
test ride done ?
strange ....she feels very under powered ??
then i realised , i popped on a YELLOW bellypan instead of my normal RED one
odd isnt it , even a small amount of yellow lowers the bhp
thank goodness the whole bike isnt yellow
, they must feel like they have a restrictor on
.
see you lot tomorrow
YETI..
strange ....she feels very under powered ??
then i realised , i popped on a YELLOW bellypan instead of my normal RED one
odd isnt it , even a small amount of yellow lowers the bhp

thank goodness the whole bike isnt yellow


see you lot tomorrow

YETI..

- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Workshop Day - Colchester Essex - April 7
great news mate, tea's are on me thenYETI wrote:YETI..brook street
see ya there .
lunch is important .. but brekkie`s first ? what we doin ?
the old girl is up n running , a bit more multi coloured than i would
like her to be but im on the road .( trackday parts )
just about to give her a test ride , should be fine![]()
see ya tomorrow
YETI..

mines a bit of a bitza aswell at the mo

HEY YOU GUYS!!!!!!
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Workshop Day - Colchester Essex - April 7
cheers styler, i was worrying about what i was going to do with the used oil, i didn't even know about the sump plug washers being an issueStyler4077 wrote:Marty, I'll bring the oil tray container and a couple of empty 4-5 ltr oil cans so you can do you oil change, I'll take the old oil away for Wicky.
Anyone got any spare sump plug washers just in case?
I'll chuck in as much tools, rags and other bits and bobs as I can.
What we doing for lunch? Is there a local shop for sandwich's etc etc?

see you tomorrow buddy, i really wanna see your new bike....

HEY YOU GUYS!!!!!!
-
- Posts: 1631
- Joined: Wed Mar 07, 2012 5:57 pm
- Location: Purfleet, Essex
Re: Workshop Day - Colchester Essex - April 7
can anyone bring up some loctite, I forgot to get some, got all the tools done but I didnt do the adapter on the carbs sorry 
Ive got bazza another set of CCTs so bazza will be going home with two sets saturday

Ive got bazza another set of CCTs so bazza will be going home with two sets saturday

- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Workshop Day - Colchester Essex - April 7
i've got some loctite anti seize copper and loctite superglue and some evo-stik serious glue, i'll bring them with me if you like....StormingHonda wrote:can anyone bring up some loctite, I forgot to get some, got all the tools done but I didnt do the adapter on the carbs sorry
Ive got bazza another set of CCTs so bazza will be going home with two sets saturday

and yeti you crack me up




HEY YOU GUYS!!!!!!
Re: Workshop Day - Colchester Essex - April 7
I'll be heading there in the car, so will have paddock stands, a decent soldering iron, lots of tools.
See you there.
See you there.
It's not falling off, it's an upgrade opportunity.
- tankslappa
- Posts: 333
- Joined: Mon Apr 02, 2012 9:57 pm
- Location: Essex, UK
Re: Workshop Day - Colchester Essex - April 7
Have fun guys, given another week I could have come along too, well I could come along now, but with no tax, MOT etc etc!
Plus as Yeti will tell you, mine is yellow, and I live at the bottom of a hill, so it's a hell of a push to get it over that :-p
Plus as Yeti will tell you, mine is yellow, and I live at the bottom of a hill, so it's a hell of a push to get it over that :-p
Re: Workshop Day - Colchester Essex - April 7
Have a great day chaps, take plenty of snaps. Gutted I can't make it.
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
Re: Workshop Day - Colchester Essex - April 7
That's a shame Kev I thought you was popping along with a pinapple.
Nevermind there will be loads of pics. And if your lucky we might get some video footage of BSM's cans for you and everyone else. If we post that, it might have to go with a warning as follows:
Warning This May Blow Your Speakers Please Lower Your Volume level.
(:-})


Warning This May Blow Your Speakers Please Lower Your Volume level.
(:-})
==============================Enter the Darkside
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Workshop Day - Colchester Essex - April 7
Ride safe guys and play nice 
