CLUTCH SLIPS AT HIGH REVS ONLY
CLUTCH SLIPS AT HIGH REVS ONLY
Hi people!
i have a slight problem with my clutch! it slips at high revs but is fine punching through the lower revs!!
do i need new clutch plates or could there be another soloution! iv bled the resiviour to the slave so i dont no what else it could be! Any ideas???? answers on a postcard!
i have a slight problem with my clutch! it slips at high revs but is fine punching through the lower revs!!
do i need new clutch plates or could there be another soloution! iv bled the resiviour to the slave so i dont no what else it could be! Any ideas???? answers on a postcard!
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: CLUTCH SLIPS AT HIGH REVS ONLY
mine is also doing the same 7k onwards
I think it's the clutch fiber plates wearing out
I think it's the clutch fiber plates wearing out

98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Re: CLUTCH SLIPS AT HIGH REVS ONLY
yea that sounds about right! have you replaced yet? think i may order some tonight and see what happens!
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: CLUTCH SLIPS AT HIGH REVS ONLY
going to take mine out and see what they are like first
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
- benny hedges
- Posts: 6110
- Joined: Sun Oct 18, 2009 5:09 pm
- Location: Warrington
Re: CLUTCH SLIPS AT HIGH REVS ONLY
engine oil change before you start fkin about with the clutch ;)
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
Re: CLUTCH SLIPS AT HIGH REVS ONLY
changed oil and filter about 6 weeks ago!
Re: CLUTCH SLIPS AT HIGH REVS ONLY
Did you use a new brand of oil? fully synth and also halfords own brand semi make my clutch slip
AMcQ
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: CLUTCH SLIPS AT HIGH REVS ONLY
Done mine two days ago with semi good oil. Still does it
Def clutch plates
Def clutch plates
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Re: CLUTCH SLIPS AT HIGH REVS ONLY
i used silkoline super four semi synth! its what i was advised to use! im still thinking its the friction plates!
bollox to it im gona order some!
bollox to it im gona order some!
Re: CLUTCH SLIPS AT HIGH REVS ONLY
I am having exactly the same problem. Need to get around to changing the plates as well
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: CLUTCH SLIPS AT HIGH REVS ONLY
Some times you can get away with sanding the steel plates to get rid of the "blue" on them. Helping some times
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5