My battery turned up and I got the bike started. Engine has a bit off top end rattle, either cam tensioner needs to adjust itself a notch (I believe it's got grooves and works like a ratchet type thing) or my valves need some adjustment. I may be able to get the tensioner to tighten a notch by giving the bike a thrashing under high revs or put it in gear and rock the bike backwards, otherwise it should tighten on it's own accord after a few hundred miles. We'll see.
I have not noticed if the rattle goes away once warmed up as I have not let the bike run long enough. Apart from that it all sounds healthy.
I also have a slight oil leak coming from between the oil filter cooler take off and the block.
![Image](http://i1087.photobucket.com/albums/j476/cybercarl0/VTR1000%20forum/FZS600%20Fazer%20Rebuild/oilfiltercooler.jpg)
The take off for the oil cooler is behind the oil filter! So it looks like I am going to have to drain the oil, whip the exhaust off, remove the oil filter and remove the filter cooler.
It has a rubber O ring but I will have to put some liquid gasket seal on as well. Doh.
And the funny thing is I had a dream about that about a week ago and was wondering if I had torqued up the bolt that holds it on. I didn't bother checking before filling with oil and putting a new filter on as I was positive I had tightened it up.
So just a few teething problems to resolve and it will be good to go.
(:-})