Where to buy a stop mod

[Image]

Is there anywhere I can buy a ready made stop mod pin for my cam chain tensioner?

[AMCQ46]

Afraid not, they have to be made to measure for your engine, but it is very simple, you are just cutting a bit of 8mm bar to length based on 1 measurement you need to take from your CCTs

[VTRDark]

Is there anywhere I can buy a ready made stop mod pin

There must be a stop amogst this lot somewhere
http://www.zazzle.co.uk/mod+buttons

(:-})

[darkember]

PM Bazza on the forum he will make them for you. You will need to send in yours for exchange.

[VTRDark]

PM Bazza on the forum he will make them for you. You will need to send in yours for exchange.

Bazza converts autos to manuals.

(:-})

[lumpyv]

PM Bazza on the forum he will make them for you. You will need to send in yours for exchange.

Bazza converts autos to manuals.

(:-})

yes, and he does them for only about the price of 2 and a half tanks of petrol, done finished, worrying over !!

[AMCQ46]

Lumpy, I think Carl's point is to make sure that the original poster knows ther is a difference between the stopper mod solution and full manual CCTs. It can get confusing

[scott02464]

Is there anywhere I can buy a ready made stop mod pin for my cam chain tensioner?

Iv not been on here for a while and I'm feeling shocked to read you are still asking silly questions like this when you've been given countless links on how to carry out the Stopper mod correctly.......:-(

[lumpyv]

Is there anywhere I can buy a ready made stop mod pin for my cam chain tensioner?

Iv not been on here for a while and I'm feeling shocked to read you are still asking silly questions like this when you've been given countless links on how to carry out the Stopper mod correctly.......:-(

trudat.

[StormingHonda]

Some people dont feel confident enough to do things like that, or trust themselves.

So buying a set already done may give them peace of mind, rather than them worrying if they done it properly or not.

Not everyones a mechanic.

[VTRDark]

Some people dont feel confident enough to do things like that, or trust themselves.

So buying a set already done may give them peace of mind, rather than them worrying if they done it properly or not.

Not everyones a mechanic.

I totally agree, but you can't buy a stop mod unless you pay someone to do it for you on your bike. It's as Amq said. each bar,bolt, whatever is used for the stopper has to be custom cut to each individual bike. The length of the stopper would be different because each bike wears and tears at difference rates.

(:-})

[MacV2]

Some people dont feel confident enough to do things like that, or trust themselves.

So buying a set already done may give them peace of mind, rather than them worrying if they done it properly or not.

Not everyones a mechanic.

+1 on that Storming.

Image, post a nice little ''please can anyone local help me fit my manuals/do a stopper mod '' style post if you are not confidant doing it yourself.

For what it's worth for cost v's peace of mind I would go for Bazza manual converts. Do it once & that's it. I do understand the reasons behind stopper mod but it won't prevent CCT failure & will involve doing it all again if they do fail, whereas manual's is fit once job done.

Please please please get it done soon before the CCT gremlins strike.

Mac

[firestorm1997]

And for what it's worth, You have to take the CCT's out no matter what, so surely it would be it would make more sence to swap em over to manuals rather than piss about modding your old ones.

[scott02464]

Not everyones a mechanic.

No Nor me

[VTRDark]

(:-})