Sorry...it doesnt exsist. yet.
I was asked by a friend to create a "hover bike" concept. A few hours of photoshop later this is what i had come up with. I thought you guys might like to see it.
If you like this and have a spare few seconds a "like" on my facebook page would always help link: http://www.facebook.com/imaginativecows
Triumph Hover Bike ?!?
- Squiffythewombat
- Posts: 1406
- Joined: Sun Apr 17, 2005 1:51 pm
- Location: Canterbury, Kent
- Contact:
Triumph Hover Bike ?!?
Squiffy_The_Wombat
Eagles may soar but wombats dont get sucked into jet engines!!
Eagles may soar but wombats dont get sucked into jet engines!!
- Squiffythewombat
- Posts: 1406
- Joined: Sun Apr 17, 2005 1:51 pm
- Location: Canterbury, Kent
- Contact:
Re: Triumph Hover Bike ?!?
chric wrote:
Id buy one looks brilliant
Hehe thanks dude, i dont think letting me work out the phyiscs would be a good idea though haha!
Squiffy_The_Wombat
Eagles may soar but wombats dont get sucked into jet engines!!
Eagles may soar but wombats dont get sucked into jet engines!!
Re: Triumph Hover Bike ?!?
Nice bit of Photoshopping and interesting concept. I'd buy one too, then I could just fly over cars
(:-})
(:-})
==============================Enter the Darkside
Re: Triumph Hover Bike ?!?
Why are the turbine intakes facing rearwards and sideways?
Why would it need a frame supporting and linking the steering stem and swingarm?
Is it all PSD or did you use a CD program Starta or Cinema 4D?
Why would it need a frame supporting and linking the steering stem and swingarm?
Is it all PSD or did you use a CD program Starta or Cinema 4D?
It may be that your whole purpose in life is simply to serve as a warning to others.
VTR Firestorm and other bikes t-shirts
VTR Firestorm and other bikes t-shirts
Re: Triumph Hover Bike ?!?
Looks to a 50/50 mix of Photoshop and some cutting and pasting of bits. Like the handlebars, exhausts, rearsets, tailight and stuff. Maybe a complete motorbike to begin with with a bit of deletion and cloning with parts added to it. Then some colour correction and blending.
(:-})
(:-})
==============================Enter the Darkside
- Squiffythewombat
- Posts: 1406
- Joined: Sun Apr 17, 2005 1:51 pm
- Location: Canterbury, Kent
- Contact:
Re: Triumph Hover Bike ?!?
Thanks guys.
As i stated it's not a pixel perfect image, it's just a matte painting for fun. I have no idea of physics or anything like that, its just ment to look cool!
The image is a .PSD only document.
Roughly it goes like this:
1) Sketch inital concept image and laydown what you want to do.
2) Find stock images that ressemble parts of the original, colours, schemes and themes.
3) Get the pen tool and start chopping key areas.
4) Place elements as you need and use layer masks, alpha blends and blending options to begin to create the shape and key elements
5) On several layers paint in areas such as the frame, engines and paintwork
6) then texture those layers
7) pipe work and frame etc. are created by extruding sections of the original image and use puppet warp and warp to bend the areas to where they need to be.
Final blending is applied
9) small elements such as stickers etc are added. these are a mix of real images and painted (such as the clocks, parts of chrome and exhausts).
10) LOTS of dodge and burn around the entire image now (80 layers combined into smart object, then in lumin mode use the lighting channel).
11) final colour correction to entire image.
12) add background and whatever other stuff
13) normally at this point the model, background or painting is exported and compositied together with other elements using either photoshop, after effects etc. etc.
Carl - your correct; pegs, rearsets etc. are off a speed tripple. entire rear end is painted, lens is a ferrari something or rather. engine is a 737 lump.
I'll post a step by step i made for somebody the other day.
As i stated it's not a pixel perfect image, it's just a matte painting for fun. I have no idea of physics or anything like that, its just ment to look cool!
The image is a .PSD only document.
Roughly it goes like this:
1) Sketch inital concept image and laydown what you want to do.
2) Find stock images that ressemble parts of the original, colours, schemes and themes.
3) Get the pen tool and start chopping key areas.
4) Place elements as you need and use layer masks, alpha blends and blending options to begin to create the shape and key elements
5) On several layers paint in areas such as the frame, engines and paintwork
6) then texture those layers
7) pipe work and frame etc. are created by extruding sections of the original image and use puppet warp and warp to bend the areas to where they need to be.
Final blending is applied
9) small elements such as stickers etc are added. these are a mix of real images and painted (such as the clocks, parts of chrome and exhausts).
10) LOTS of dodge and burn around the entire image now (80 layers combined into smart object, then in lumin mode use the lighting channel).
11) final colour correction to entire image.
12) add background and whatever other stuff
13) normally at this point the model, background or painting is exported and compositied together with other elements using either photoshop, after effects etc. etc.
Carl - your correct; pegs, rearsets etc. are off a speed tripple. entire rear end is painted, lens is a ferrari something or rather. engine is a 737 lump.
I'll post a step by step i made for somebody the other day.
Squiffy_The_Wombat
Eagles may soar but wombats dont get sucked into jet engines!!
Eagles may soar but wombats dont get sucked into jet engines!!
- Squiffythewombat
- Posts: 1406
- Joined: Sun Apr 17, 2005 1:51 pm
- Location: Canterbury, Kent
- Contact:
Re: Triumph Hover Bike ?!?
Squiffy_The_Wombat
Eagles may soar but wombats dont get sucked into jet engines!!
Eagles may soar but wombats dont get sucked into jet engines!!