Finally installed set of Krieger manual cct.s to my storm.
Thanks to Rob De Hoo who supplied them
found him on firestorm FB forum
really helpful and easy to deal with.
anyone looking for a set look him up
ccts
-
Uriah Heep
- Posts: 6
- Joined: Wed Jul 13, 2011 9:46 am
- Location: Aberdeen
Re: ccts
I'm expecting a set from Rob later this week 
Was fitting reasonably straightforward?
Was fitting reasonably straightforward?-
firestorm61
- Posts: 27
- Joined: Fri Jan 06, 2012 11:36 am
Re: ccts
I got one of the mechanics at work to do mine as I wasn'tconfident to do them. It took a couple of hours but a lot of that is prep work. If doing it yourself iinstructions rob send are spot on. Don't go by Haynes manual
I had a locking key for old tensioners and we locked them in place before removing which gave us a guide to set manuals.. Take time and most importantly turn engine over by hand to make sure nothing is catching or tight before firing bike up for first time.
I had a locking key for old tensioners and we locked them in place before removing which gave us a guide to set manuals.. Take time and most importantly turn engine over by hand to make sure nothing is catching or tight before firing bike up for first time.
Re: ccts
Or see the fitting guide in my signature. No need for a locking key if fitting manauls.If doing it yourself iinstructions rob send are spot on. Don't go by Haynes manual
(:-})
==============================Enter the Darkside