what have you done to your "bike" today

[agentpineapple]

changed the entire wiring loom, my bike now has a datatool alarm......
a little tip for anyone changing their wiring, work from the back to the front, especially if you have a big alarm box on the rear...

[MacV2]

changed the entire wiring loom, my bike now has a datatool alarm......
a little tip for anyone changing their wiring loom, get Carl to do it, it's much easier...

Sorted...

[mattycoops43]

Balanced carbs on the storm and the fazer, neither needed any adjustment, but neither had been done in my ownership. Glad I know they are both set up right now.

[oorwullie43]

Changed the oil and filter on the V-Strom. Then swapped the speed sensor over on the VTR! Another exciting day! Too wet to go out and play!

[Watty]

Fitted vtr.org stickers,look proper tidy in chrome . Thanks to Pat

[seb421]

changed the entire wiring loom, my bike now has a datatool alarm......
a little tip for anyone changing their wiring, work from the back to the front, especially if you have a big alarm box on the rear...

have you got the system 3 one off carl i sold him then?

[VTRDark]

have you got the system 3 one off carl i sold him then?

Yes mate.


I just fitted a dark tint Fabbri screen.

THIS POST IS WORTH LOADS WITH NO PICS
Use you imagination

(:-})

[captainoi666]

Last update in 08-2013...a little bit 'bling bling' for my 'golden girl'

[seb421]

Lloydie i forgot to give you the hose attachment for the quick drain oil valve

PM your address when you see this and ill pop it in the post just seen it when i went in the garage and went oh bugger

[lloydie]

Lloydie i forgot to give you the hose attachment for the quick drain oil valve

PM your address when you see this and ill pop it in the post just seen it when i went in the garage and went oh bugger

Will do thanks Seb let me know how much postage is and ill cover it :-)

[coinneach]

Front wheel came off to replace tyre so taking the opportunity to give the forks a quick tidy up,
went daft with the stick on carbon vinyl and test fitted a cheap undertray,not happy with the fit but itll do just now

[Steve6088]

went daft with the stick on carbon vinyl

Don't let BSM see you saying that

[coinneach]

went daft with the stick on carbon vinyl

Don't let BSM see you saying that

I know thinks its his idea I stole for the light

[Kev L]

Today I cut the yellow faded plastic lenses off of my GT250M clocks and replaced them with some glass ones from an old cx clock set. Also had to evict numerous families of spiders (sorry Frank!) that had taken up residence in the clocks.
I have also zinc plated various bits and bobs of brightwork from the Suzi. A very satisfying process turning bits of rusty metal into shiney bits to be bolted back on.

[agentpineapple]

went daft with the stick on carbon vinyl

Don't let BSM see you saying that

I know thinks its his idea I stole for the light

glad to hear you have seen the light.........no pun intended.....