what have you done to your "bike" today

[Jamoi]

Looks nice does that, AP

I created a complete and utter mess in my garage!

[VTRDark]

Stick the kettle on and I think you need a bigger vice.

(:-})

[Jamoi]

Stick the kettle on and I think you need a bigger vice.

(:-})

Milk & sugar?

I love my vice, it's my favourite tool! Except when it traps the skin on my hand between the bar & spindle, ouch!

[agentpineapple]

yowser that's a biggun!!!!!!!

the vice is rather large aswell.........
if only I had a garage...

[Jamoi]

yowser that's a biggun!!!!!!!

the vice is rather large aswell.........
if only I had a garage...

Well, my garage is your garage...

Except when it's full of junk, 50 miles away & locked!

[agentpineapple]

I don't know whats up with photobucket tonight, the last two pictures will not rotate to the correct position....
lets try this one then....

[seb421]

Put the callipers back together and bled up the front brakes other day and did them again today a little bit more air came out the system so its defo bubble free now

Today i striped and cleaned the rear as the rear has been sticking on and the disc has been scorching

rear piston was stuck on one side one came out fine the other was a wombles nightmare hence the sticking on

also found the a previous owner / garage has stripped the thread on the calliper bracket on one side, douche bags so need a new rear calliper bracket

brakes all done now front and back, both wheels turn and spin free and brakes are working like a new bikes

defo worth while doing if its somthing your bike has not had done in a long time, difference in a piston and seal clean / replacement is night and day

[seb421]

My high tech science grade brake bleeding equipment





Red neck but it works well

[Jamoi]

My high tech science grade brake bleeding equipment





Red neck but it works well

Oi you're stealing my year 3 science project idea!

Good work, must be nice having decent brakes!

[lloydie]

Good work Seb


Today I loosened the clutch basket on the engine for the race bike and remover it's fly wheel ready for when funds are available to get two lightened .

Removed a speedo clock face to be sent to rob
I made a note of where the needle sits in its neutral poison

So it can be fitted back in the same place .
And did a little polishing of the standard exhaust headers and had a little tidy up as it's getting full in the garage again .

[koko]

Fitted the 42 tooth supersprox and polished carrier to my storm.Now 15/42 gearing,with top yoke and renthals.6mm spacer on the rear shock. Went for a ride . . .OMG! 2nd gear up she comes on the throttle. This is what its all about people FUN! And thanks agentp for the sprocket.

[agentpineapple]

Removed a speedo clock face to be sent to rob

nice one lloydie, as i'd be interested in some better dials in mph....

[lloydie]

Got to take one for the team :-)

[agentpineapple]

Got to take one for the team :-)

that's normally virts job......

[lloydie]

He's a little sensitive today ! Spat his dummy out too :shock: