
Anyone had the same and got a solution

you need to ventilate the shed to let the air throughlanny wrote:Its in a nice timber shed parked on the bike table with a bike cover over it. There was a slight ground frost this morning before warming up nicely around 11am. Thinks im going to have to put some heating in there, I was thinking something like a tube type greenhouse heater placed under the sump, they dont use much electric and should be enough to keep the damp off. Hopefully!
+1macdee wrote:you need to ventilate the shed to let the air throughlanny wrote:Its in a nice timber shed parked on the bike table with a bike cover over it. There was a slight ground frost this morning before warming up nicely around 11am. Thinks im going to have to put some heating in there, I was thinking something like a tube type greenhouse heater placed under the sump, they dont use much electric and should be enough to keep the damp off. Hopefully!
also insulate the walls and ceiling and get some sunlight in there this will help
Ideal for frequent outdoor storage, this lightweight cover is 100% waterproof and breathable. The excellent breathability of the Stormshield fabric means the cover can be put on a wet bike and the remaining moisture will permeate through the cover. The 100% waterproof protection ensures that your bike is never exposed to the elements, even in harsh weather conditions.
Many manufacturers can make a waterproof cover for your bike, but breathability is crucial. Moisture rising from the ground will get trapped under the cover. If the moisture is unable to escape it can damage paintwork, rot seals and accommodate mould. The technology behind our Stormshield Lite fabric allows moisture to escape from the surface of your bike, keeping it dry. All Specialised Covers’ fabrics are non-abrasive.
Agree. It's the differences in outside and inside temps that cause the condensation in the first place.I suggest do not heat the shed as that will make it condensate more. You need to install a dehumidifier on a timer. Then i would cover the bike with a blanket.
Wicky wrote:If your cover is impermeable and retaining moisture then get a new cover along with the other suggested measures to get some air flowing.
http://www.specialisedcovers.com/bike-c ... -lite.html
Ideal for frequent outdoor storage, this lightweight cover is 100% waterproof and breathable. The excellent breathability of the Stormshield fabric means the cover can be put on a wet bike and the remaining moisture will permeate through the cover. The 100% waterproof protection ensures that your bike is never exposed to the elements, even in harsh weather conditions.
Many manufacturers can make a waterproof cover for your bike, but breathability is crucial. Moisture rising from the ground will get trapped under the cover. If the moisture is unable to escape it can damage paintwork, rot seals and accommodate mould. The technology behind our Stormshield Lite fabric allows moisture to escape from the surface of your bike, keeping it dry. All Specialised Covers’ fabrics are non-abrasive.