what have you done to your "bike" today

[lloydie]

Looks like you've been having fun

Today I picked some more parts up for a man in Lycra !!
Only a few more bits to get for the track bike now

[seb421]

I've never stripped a modern road bike down as much as this before, so was a little nervous! I can't believe how a fully functioning bike can be reduced to this in a matter of hours!

Just need to get engine out etc & prepare everything for powder coat. Oh also got a fireblade swingarm so I can transfer the brace etc

I'm more nervous about trying to put it all back together properly!!!



It's a good test for my sex swing, I wouldn't want anyone suing me if it broke!

Mate this is not a modern road bike lol its a dinosaur compared to a modern fuel injected machines

Firestorm has to be one of the easiest bikes to get at and work on their is

[Jamoi]

Ok, well... This is the most modern road bike I have stripped down to this extent. It's 'modern' compared to my previous projects. I appreciate it's not cutting edge.

I'll go away now...!

[seb421]

its a great bike to work on buddy, strong, very well made imo and simple electrics not much to go wrong with it

fuel injection is great but there is a sh1t load of sensors and wires on the modern bikes,

also Fi is great for fuel economy but i don't think you can get a throttle response as smooth as a carb from the off

always get the on / off snatch with FI when opening and closing the throttle somthing you don't get with well set up carbs

just to get one side panel off the gixxer it was a pain, a mix of 17 tabs, screws and bolts to just get the side off!

[saint gaz]

Finally had the carbs balanced and tweaked. Feels like a new bike now, it really was a bag of shite before but never realised it :-(.
Excellent job done at hammer and tongs.

Sent from my GT-I9505 using Tapatalk now Free

Might be a bit cheeky, but how many pennies did you spend at Hammer & Tongs? The carbs on mine need doing but might have to wait till spring as I want to get the front end sorted first!

Cost me 35 to put the bike on the dyno in the first place and then 170 to sort the carbs out. Well worth it in my opinion, is running really smooth now. Feels like a different bike. And it increased my bhp to 106 at the same time. Bonus.

Sent from my GT-I9505 using Tapatalk now Free

[oorwullie43]

Finally had the carbs balanced and tweaked. Feels like a new bike now, it really was a bag of shite before but never realised it :-(.
Excellent job done at hammer and tongs.

Sent from my GT-I9505 using Tapatalk now Free

Might be a bit cheeky, but how many pennies did you spend at Hammer & Tongs? The carbs on mine need doing but might have to wait till spring as I want to get the front end sorted first!

Cost me 35 to put the bike on the dyno in the first place and then 170 to sort the carbs out. Well worth it in my opinion, is running really smooth now. Feels like a different bike. And it increased my bhp to 106 at the same time. Bonus.

Sent from my GT-I9505 using Tapatalk now Free

Thanks for the info, like I sed, I,v got the front end to sort first. I've got a couple of days off after today and seeing the weather has turned I,ll try and make a start this week. If I can make room in the garage!

[lloydie]

Fitted some sp1 viper cans and link pipes :-)

[Virt]

Fitted some sp1 viper cans and link pipes :-)

Is it so hard to not fit new exhausts onto something every 3-4 weeks?

[lloydie]

[youtube][/youtube]

[lloydie]

Fitted some sp1 viper cans and link pipes :-)

Is it so hard to not fit new exhausts onto something every 3-4 weeks?

No I try but I have a problem

[lloydie]

And Virt just wait till I fit these
To these

Cream every where

[Virt]

Stop bragging I still have my competition cans to fit at some point, it won't work..


... Much

[turbo_billy]

And Virt just wait till I fit these
To these

Cream every where

Sell them to me.....you know you want too.....

[lloydie]

If I ever do you'll have a fight on your hands

[Jamoi]

Oooh very nice Lloydie I want I want I want