How would you describe the song of a dying CCT?

[Watty]

But my flywheel has no markings And I reckon there are blind, limbless monkeys better at doing mechanical work than me

I'm sure there are plenty of lads on here close to you that would lend a hand mate I would if I weren't so far away! Just don't do nothing!

[callam_nffc]

STOPPER MOD!!!!

+10000 also remember some people have caused there engone to grenade when the manuals have backed out

After only owning my storm a short while Amcq helped potentially save my storms engine one day by doing the stopper mod

[Mav617]

I also need to do the stopper mod. Guy I bought some bits off, first question "have you blown it up yet?", his lad had a Storm, which lunched it's CCT, engine rebuilt by Roger D - did it again 600 miles later. Stuck with one of the airbox screws that's chewed, FFS thought Yamaha were bad for using fasteners made out of plasticine, Honda must have used the same supplier! I know it's the perfect time to do it, I just know I'll muck it up

[Jamoi]

Here's an idea Virt, get hold of a replacement flywheel with markings, (£30) fit it, then do stopper mod (£3).

Sell your flywheel (+£30)

£3 spent, problem solved and peace of mind restored!

https://www.youtube.com/watch?v=Z9t_KDG ... ata_player

Sent from my GT-19505 using Telekinesis

[Virt]

I don't have £30 to spare the fuel economy is worse than I expected and wallet is suffering


Sent from my iPhone using Tapatalk

[Watty]

I don't have £30 to spare the fuel economy is worse than I expected and wallet is suffering


Sent from my iPhone using Tapatalk

Borrow a flywheel??

[AMCQ46]

Setting the engine at or close to tdc for the Stopper doesn't realy need the flywheel markings, you can work from the cam position on the rear cyl and then go 450 degs.

I will do them for you but a) you come to my house and b) you bring the CCT key I loaned you

[Virt]

Setting the engine at or close to tdc for the Stopper doesn't realy need the flywheel markings, you can work from the cam position on the rear cyl and then go 450 degs.

I will do them for you but a) you come to my house and b) you bring the CCT key I loaned you

IloveyouIloveyouLoveyou!
I still have the key safe and sound, however I'm lacking satnav on this bike Might need to see if I can steal the satnav holder off the hornet then

Do you guys think the bike will be safe to use? I can't afford, in terms of money OR time, to use the bus. 90 minutes to get home/to work ( not including waiting 30 minutes after work finishes ) is not something I can do. I'm drowning in work currently

[turbo_billy]

Do you guys think the bike will be safe to use?

Heads or Tails

[leevtr]

Bring it down the pub on Friday, we'll fix your bike in the car park after about 10 pints

[Wicky]

Do you guys think the bike will be safe to use?

[youtube][/youtube]

[Virt]

Heads or Tails

That third option, I think it's called "happy ending"?

Bring it down the pub on Friday, we'll fix your bike in the car park after about 10 pints

Couldn't possibly go wrong.

[AMCQ46]

Use it tomorrow' for work and then come to my house after work then you have taken the minimum risk ...... Then after that we will fix the CCTs

[Bleh]

Sorry to boycott the thread but could someone possibly message leevtr for me regarding his cans? I'm assuming he can PM me and I should be able to reply!

In relation to the CCT's, I had one apart the other day and what a simplistic design. The stopper mod is obviously the cheapest and most effective method to prevent failure but I wondered if anyone has managed to purchase replacement/ upgraded springs... The springs realistically are the only parts that are going to fail and would be surprised if there's no repair kits for them!

[Virt]

Use it tomorrow' for work and then come to my house after work then you have taken the minimum risk ...... Then after that we will fix the CCTs

I thought you were in Germany?

Was about to PM him but Al has made a post for you